Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Can anyone tell me how to wire 3 speed 4 wire switch for heritage farm ceiling fan
[ 8 Answers ]
:confused: Need help my chain broke no light in kitchen no fan working:) :)
Can I mix outlets and lighting on one 20 amp circuit all with 12 g wire?
[ 3 Answers ]
I have an open unfinished basement with a 20 amp circuit which supplies only a junktion box. It used to have a pull light on it. I have continued the 12 gage wire, which entered the junction box originating in the panel, from the junction box to two new floresent lights and ran further 12 gage...
Trying to wire a 3 speed, 4 wire ceiling fan switch
[ 7 Answers ]
I am trying to wire a 3 speed 4 wire ceiling fan switch for an Aloha Breeze 52" ceiling fan. The original fan switch fell apart when I tried to see how it was connected. I have to connect black (hot wire), grey, orange and purple wires to the switch (L,1,2,3). The orange and purple wires come...
Can I splice off 1 wire to create 2 separate wire connections for 2 ceiling fans
[ 10 Answers ]
I'm planning on installing 2 ceiling fan, 1 in each of 2 bedrooms. There's no electrical on the ceilings and need to come down from the attic. The attic has several different white plastic contained wires running throughout the attic. I'm wondering if I should splice from 2 separate sources, or...
Wire Splicing for landscape lighting
[ 6 Answers ]
I recently purchased 100' of 14 gauge wire (includes ground wire) for some exterior landscape lights. However, because the wire is much thicker than the wire that came with the landscape light kit the pins on the light connectors will not penetrate the thicker wire. Because I had already submerged... View more questions Search
|