Ask Experts Questions for FREE Help !
Ask
    jlegore2000's Avatar
    jlegore2000 Posts: 10, Reputation: 1
    New Member
     
    #1

    Nov 24, 2008, 01:45 PM
    Cracked pvc pipe
    I have a crack on the bottom of my pvc pipe that comes out of the bottom of my tub.To replace it it looks like I would have to raise my tub because there is a beam close to it and I can't turn it where it is.I was wondering if there is any kind of compound I could use to seal the crack or should I just call a Plumber?
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
     
    #2

    Nov 24, 2008, 02:00 PM

    To get the best possible answer, post a pic using "Go advanced".
    Fr_Chuck's Avatar
    Fr_Chuck Posts: 81,301, Reputation: 7692
    Expert
     
    #3

    Nov 24, 2008, 02:35 PM

    Is this a draim line (and no water pressure) or a hot or cold water supply line
    jlegore2000's Avatar
    jlegore2000 Posts: 10, Reputation: 1
    New Member
     
    #4

    Nov 24, 2008, 02:43 PM

    It is the tub drain no high pressure
    jlegore2000's Avatar
    jlegore2000 Posts: 10, Reputation: 1
    New Member
     
    #5

    Nov 24, 2008, 03:09 PM
    [attach]Name:  RSCN0272.jpg
Views: 1773
Size:  45.0 KB[/attach]
    Attached Images
     
    letmetellu's Avatar
    letmetellu Posts: 3,151, Reputation: 317
    Ultra Member
     
    #6

    Nov 24, 2008, 05:19 PM

    Here is my solution, I would unscrew the drain out of the tub, this will let the white piece (The Shoe) drop down, go to Home Depot and see if they have just this part, a PVC shoe, if not I would buy a new tub waste and overflow kit. Then replace the one you took out with the one in the new kit, keep the other paarts for spare parts.
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
     
    #7

    Nov 24, 2008, 06:11 PM

    The shoe thingy can be shortened to any length desired.

    If you can't unscrew, I'd use a hot knife to cut the nut.

    THE PROBLEM IS GOING TO HAPPEN AGAIN

    I know you didn't want to hear that. What happens is yhe weight of a person and the water in the tub flexes the tub and hits the iron pipe just under the shoe. You have to get some clearance there. I'd say at least 3/8 to 1/2 an inch.

    HOW?

    A wood chisel comes to mind.

    So does a flex shaft Dremel with a saw blade. See: Attachments

    You need to enlarge downward the holes supporting the galvanized pipe for a few joists to either side.

    You can use plumbing hangers/allthred/base to push the pipe slightly downward to create clearance for the shoe pipe.

    You HAVE to do this!
    afaroo's Avatar
    afaroo Posts: 4,006, Reputation: 251
    Ultra Member
     
    #8

    Nov 24, 2008, 06:48 PM

    There is a repair kit for repairing this type of cracks, see the attach link, Thanks.

    John

    Pipe and Hose Leak Repair Tape

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Cracked/Crumbled tub drain pipe, best way to repair. [ 6 Answers ]

House built in the 50's, and the original drain pipe from the 1st floor tub extends about 12" down into the garage below. This pipe has cracked/crumbled right at the elbow (has a small bend that looks like a 5" trap) before running horizontal with the garage ceiling. What is the best way to fix...

Does the furnace Pipe look cracked to you? [ 27 Answers ]

Can you guys please look at the following pictures and tell me what you think. Does the exhaust pipe look damaged to you? Did the repairman who tried to repair it do a poor job? The pipe has since been replaced but I need some help from you guys. Thanks.

I cracked my cast iron pipe. [ 5 Answers ]

Well, I've gone an' done it now... I'm tapping into a 4" CI waste pipe that runs outside my house parallel to the foundation, trying to add a Combo-Wye to a new stack inside the house. I want to use all cast-iron for the underground/through-foundation section because i feel it's stronger,...

Cracked Water Pipe in Basement [ 2 Answers ]

I was just told the reason my toilet in the basement was not flushing efficiently was because of a craked water pipe. They jack hammered a 2 ft X 1 ft area and replaced the pipe and then poured new concrete. They billed me $1400 to do this. Does this sound right?:confused: Thanks, LEMEME

Cracked Furnace Pipe [ 49 Answers ]

Hello everyone I have a quick question. One of the pipes which is attached to our furnace and leads outside cracked about 8 months ago. The repairman came and took care of it using waterproof adhesive sealant. A few weeks ago, another repairman came to clean up a natural gas leak and I asked...


View more questions Search