Ask Experts Questions for FREE Help !
Ask
    mundo's Avatar
    mundo Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 23, 2008, 01:25 PM
    I have replaced the bad circuit breaker. But no electricity.
    Hello,
    I had an old and broken circuit breaker that I have recently replaced it to a new one. But, my electric outlets and lights are still not working. Its not getting any juice, period. All the other ones are working fine just the one that I have replaced is not... please, help:confused:
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
    		  
    #2

    Nov 23, 2008, 02:08 PM
    Did you test it at the output terminal??
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Theory of vacuum Circuit Breaker & sf6 circuit breaker [ 15 Answers ]

I want to know about the basic Theory of vacuum Circuit Breaker & sf6 circuit breaker

Replaced circuit breaker still no power to garage [ 5 Answers ]

There was an overload many times on this specific breaker, and we replaced it and there is still no power to the garage. It was a double switch 20 amp circuit breaker/fuse that was replaced, and the main switch outside to the power was shut off before we replaced the breaker. There was a severe...

Circuit breaker OK, but no electricity in living room/dining room [ 5 Answers ]

I have a 100 year old farm home. The lights went out in living room and dining room Thanksgiving night. The circuit breaker appears normal and the panel is OK. What went wrong?

Any way to measure electricity usage by circuit [ 13 Answers ]

My electric bill has been really high! Sometimes reaching over $600 for a 2400 sq ft house. I thought it was the cost of electricity and my family constantly using the central air conditioner. However last month due to some remodeling my central air system has been disconnected and my bill only...

Installing a circuit breaker in an existing box; alternative forms of electricity [ 18 Answers ]

Hello: I have a Sears Craftsman 6hp 150 psi 33 gallon compressor. Electrical measurements are 120v/15amps - basically meaning it could run on normal household current. However, when I start it up, after about 3 seconds, it shuts off. I tried using the dedicated outlets in my apartment,...

View more questions Search