Ask Experts Questions for FREE Help !
Ask
    LYNNZ66's Avatar
    LYNNZ66 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 20, 2008, 11:29 AM
    Heat not working
    I tried to turn on my heat this past weekend and it did not work my air works fine but the heat does not.the furnace is hot but the fan will not blow. It is a nordyne intertherm model e2eb-015ha in a modular home. Everyone I spoke to says it is quite possible the blower relay or fan and limit switch I just need to know wheree these are located on this unit to test them I can not afford the $150.00 service call can anyone help
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Oct 20, 2008, 03:08 PM
    Look on the blower door for your wiring diagram and follow that to find the blower relay or any other parts you want to check. Also in many units the sequencer acts as a blower control device.

    Here is a wiring diag

    http://www.nordyne.com/Literature/7103180.pdf

    If you have the A/C,off and heat switch located on the furnace this is a diagram for you.

    http://www.nordyne.com/Literature/707545a.pdf
    mygirlsdad77's Avatar
    mygirlsdad77 Posts: 5,713, Reputation: 339
    Plumbing Expert
    		  
    #3

    Oct 20, 2008, 04:14 PM

    Gas or electric furnace? If gas ,I may be able to help. If electric, sorry , I'm no help.
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #4

    Oct 20, 2008, 04:36 PM
    It is electric. I posted the diagrams for this person but you have to know how to use them.
    mygirlsdad77's Avatar
    mygirlsdad77 Posts: 5,713, Reputation: 339
    Plumbing Expert
    		  
    #5

    Oct 20, 2008, 04:49 PM

    Exactly right hvac. You must know what you are dealing with when it comes to electric furnaces. I could fix your furnace if I were there but I wouldn't recommend dealing with this kind of voltage by yourself, unless you are indeed knowlegable of such systems.
    maguyver's Avatar
    maguyver Posts: 7, Reputation: 1
    New Member
    		  
    #6

    Nov 22, 2008, 11:48 PM
    If this system requires a fan belt then maybe it's just a fan belt.
    Turn your system off and check the area of the blower motor. If u see a broken belt then that is the problem.
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #7

    Nov 23, 2008, 03:09 AM
    Quote Originally Posted by maguyver View Post
    if this system requires a fan belt then maybe it's just a fan belt.
    Turn your system off and check the area of the blower motor. If u see a broken belt then that is the problem.

    nordyne intertherm model e2eb-015ha in a modular home

    Nordyne never used a fan belt in there units. Take another guess.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Heat is not working [ 7 Answers ]

My furnace is working and the pilot is lit. the fan will run when I turn it on. The heat is not coming on but if I switch to air conditioning and lower the temperature on the thermostat, the air will work. Is this a furnace problem or with the thermostat on the wall, I only have the one. The fuse...

Heat and Air not working on Attic unit, but blower working. [ 1 Answers ]

The blower is working fine on our Heating and Air Conditioning unit but neither the Air or Heat will work. The emergency Heat works fine though. The unit is a Carrier with the words American Standard written on the outside fan unit. What should I look for before calling a tech or what would this be...

A/C working, switched to heat, now ac and heat don't work [ 1 Answers ]

Hello, Replaced my thermostat in the summer, everything worked good,switched the new thermostat to heat for the first time, now neither the A/C or heat work? Any Ideas? Andy

Heat, a/c fan not working [ 1 Answers ]

The heater was working fine yesterday morning. Last night when I returned home, it was freezing. Nothing will work - not the heater, the air conditioner or fan. There eis not even a clicking noice at the thermostat when I turn it up, down, from one function to another. I flipped the breaker in...

Heat isn't working [ 7 Answers ]

Hello, I have central AC/Heat and the heat portion doesn't appear to be working. New to home and have not ever had it working. Is there any common problems that anyone can let me know of so I can check them out. When the heat is on, it blows air, just not hot air. Thanks in advance. David

View more questions Search