Ask Experts Questions for FREE Help !
Ask
    Jaltieri04's Avatar
    Jaltieri04 Posts: 4, Reputation: 1
    New Member
    		  
    #1

    Nov 22, 2008, 05:39 PM
    Furnace blower won't start (395GAD000075)
    We have a Bryant forced hot air furnace. Its about 25years old and works very well for the exception of the "blower". It doesn't turn on at all so its not forcing to blow any hot air through the home. The model number is 394GAD000075 the s/n 1582A01265.

    Any help would be greatly appreciated.

    Thanks
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Nov 22, 2008, 06:38 PM
    Will the blower run when you switch the thermostat to Fan ON instead of auto?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Goodman furnace doesn't come on.blower doesn't start [ 13 Answers ]

Hi, I have a Goodman Furnace GMP075-04 about 9 years old.. it doesn't come on when I switch my thermostat to heat... I replace the ignitor last year and it worked fine until now... blower doesn't come on either... I tried turning the air conditioner on and it works fine... I have went through the...

Furnace blower can not auto start [ 29 Answers ]

I have a problem with my furnace blower not starting automatically. It works good when I swiched the fan option to "ON", the furnace was burning and fan was running. However if I pick "AUTO", only the furnace burns periodicaly, and the fan totall gets stuck. I am wondering if it is a wiring...

Furnace blower will not start up [ 3 Answers ]

I replaced my filters and after everything was put back together there is no response from the blower, the furnace will heat up but the blower does not respond. The filter cover has been replaced and the cut-off switch is be pressed. Thanks

Furnace blower needs assistant to start [ 2 Answers ]

My furnace's blower will not start without assistant. Does anyone have suggestions?

Why does my gas-furnace not run? (fan-blower won't start) [ 4 Answers ]

Hi Why does my gas-furnace not run? (fan-blower won't start) I could not see any blown fuses or circuit-breakers; power-switch is on; I ignited the pilot-light and turned the temp to 90 in thermostat - but fan-blower did not start at all, even after waiting for 10 min; I measured voltage at fan...

View more questions Search