Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Goodman furnace GMNT080-4 furnace runs good for a while then has to be manually reset
[ 5 Answers ]
I have a Goodman GMNT080-4 (90%). I'm having the same problem As Streatherg did back in the Nov 2006 question. I reviewed his article and tried Every thing on there but seems to be doing the same thing. The furnace kicks on for about an hour then locks out and has to be manually reset threw...
Colman furnace
[ 6 Answers ]
Have A Colman Furnace Dated 2003-model Number-dgaa070bdta-have A Lot Of Trouble With Combustion Air Switch-either Stuck Closed Or Open(have Purchased 3)had To Sucked On Hose To Combustion Air Switch To Make It Close And It Will Work For Awhile. Help
Colman furance
[ 4 Answers ]
My colman furnace runs short cycle on and off every 2min replaced double stacks new thermostat still same way. How do I fix this problem
Colman gas furnace clicking, then off
[ 1 Answers ]
My colman furnace seems to light up with the ignition properly... the flames are good for the prewarm period, then it clicks 3 times and turns off. I f this happens during the night, and doesn't come on... the small fan that removes unwanted gas before ignition is still running. If I power off...
Colman electric furnace
[ 2 Answers ]
I have a colman electric furnace in a late 80's mobile home. When the thermostate turns on the heating elements get hot but the fan will not start for 3 to 5 minutes. It will start after this time and run out the cycle. What keeps the motor from starting in this 3 to 5 minutes? Yes it is turned off... View more questions Search
|