Ask Experts Questions for FREE Help !
Ask
    rednecktech01's Avatar
    rednecktech01 Posts: 1, Reputation: 1
    New Member
     
    #1

    Nov 18, 2008, 03:12 PM
    Bad air compressor - now heater doesn't work
    Okay, I can fix most anything, but I know next to nothing about HVAC. A friends got a central air conditioning unit that the compressor went out on, which was fine as it wasn't hot. But now it's cold, and the heater will not come on either. It is not a gas heater, and I can find no elements, and am wondering if maybe this is a AC/Heat pump? If so, would replacing the compressor work? I guess that's a pretty obvious answer, but... They do not have any paperwork for the unit, nor do I know what kind it is, but am going to take apart the condensing unit so I can get to the compressor and check it out, size style, make, model. Anything I should know? Or look for?
    nathen171's Avatar
    nathen171 Posts: 5, Reputation: 1
    New Member
     
    #2

    Nov 18, 2008, 04:44 PM

    OK first if it is a heat pump u can tell by the lines going to the compressor! There is a sencor as well valve that has three lines coming from it! Either way if your compressor shot you need a new condensing unit, its better to buy a new one than to try to put a compressor in an old one. If not your going to have a lot more problems than just that! And its not much more to just buy a new one
    mygirlsdad77's Avatar
    mygirlsdad77 Posts: 5,713, Reputation: 339
    Plumbing Expert
     
    #3

    Nov 18, 2008, 04:52 PM

    If it is a heat pump, there should be electric elements for backup heat. Or gas backup. Replacing compresser means you would have to be licensed to work with refrigerants. Probably time to call for professional onsight help. Will save you a lot of headaches in the short and long run.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Goodman gas heater doesn't work [ 8 Answers ]

It's been working all right till this morning. I woke up and the room temperature was around 60 :( . All I know about it is that it is a goodman brand furnace. It doesn't have a pilot, but an automatic ignitor. We followed the instruction to reset it -- shut down the electricity, shut down the gas,...

Air conditioner fan and heater fan do not work [ 1 Answers ]

My air conditioner will not come on. I check to see if the furnace fan would come on with the heat setting and it also does not work. I checked all the outside circuit breakers and took the yellow wire on the thermostat and touched it 2 minutes to the red wire, the AC motor did not start. I suspect...

Heater will not work [ 2 Answers ]

The air & heater works from same thermostat.The air works fine,thermostat clicks when set to heat.But nothing happens

First my fan wouldn't work now my compressor won't come on [ 1 Answers ]

I have a gas heater on my central air and heat unit.I changed my thermostat to a honeywell RTH110B non-programmable. My system has 4 wires(red,green,white,and yellow).I hooked the wires up according to the colors and letters.My central air and heat unit is a Ruud it has a honeywell control by the...

First my fan wouldn't work now my compressor won't come on [ 3 Answers ]

At first my fan stopped working on my central air and heat unit.My compressor kept running outside when the switch was on auto or on.I changed the thermostat the compressor kept running ,but the fan would not come on inside the house.This morning the fan came on inside the house but the compressor...


View more questions Search