 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Is there a clutch adj. on a 1994 s-10
I've got a s-10 that I can't get the clutch to work on. Ive replaced the slave cylinder and clutch master and the clutch and still can't get it bleed all the way. Ive bleed it till my pedal is stiff with little to no play in it at all. Im thinkn that maybe its bleed but needs adjusted.
|
||||
|
||||
|
One of the advantages of that hydraulic system is that there is no adjustment needed. When you say, "pedal is stiff," is the shift fork on the transmission actually moving when the pedal is depressed? You may have a problem with the fork or throw-out bearing. Let us know. |
||||
Not your question?
Ask your question
View similar questions
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
A/c clutch kicking off and on
[ 1 Answers ]
2002 v70 a/c is kicking off and on check freyon is full 40 low side 350 to 375 high side let it idle clutch stays on and cool,give it gas are go down the street and start blowing hot can it be the clutch wore.
94 GMC clutch
[ 1 Answers ]
94 GMC Sierra 1500 5 speed The problem: push clutch in, put in gear, let out clutch without touching the gas and it just sits there. If I keep giving it gas it will move after 30-60 seconds, but it does it going into every gear if I try to drive it down the road. Any help would be great.
View more questions Search
|
