Ask Experts Questions for FREE Help !
Ask
    Reno2008's Avatar
    Reno2008 Posts: 34, Reputation: 1
    Junior Member
    		  
    #1

    Nov 17, 2008, 11:59 AM
    Engine Size & Type?
    My previous Tenant has left behind an engine block and all I know is it's a V8 with a oil filter called "BALDWIN B6". I'm just wondering what size and type of engine it may be.
    kitch428's Avatar
    kitch428 Posts: 1,440, Reputation: 152
    Ultra Member
    		  
    #2

    Nov 17, 2008, 03:39 PM

    No way of telling from here. You can post pics if you'd like. I can identify most. May be worth something.
    Reno2008's Avatar
    Reno2008 Posts: 34, Reputation: 1
    Junior Member
    		  
    #3

    Nov 18, 2008, 09:54 AM

    V8 ENGINE BLOCK- FREE!!! - Edmonton Car Parts For Sale - Kijiji Edmonton

    Click on the above link to see the pictures
    kitch428's Avatar
    kitch428 Posts: 1,440, Reputation: 152
    Ultra Member
    		  
    #4

    Nov 18, 2008, 04:43 PM

    350 Chevy V8. You'll most likely get someone wanting it for scrap value. But, at least it will be gone, eh?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

What type and size air filter for ruud furnace [ 3 Answers ]

Hello- I was changing the filters in my mom's furnaces in her house. When I got under the crawlspace, the furnace filter cover says that the filter is a permanent type. There was no filter in it at all and I need to know what kind goes in it. It is a ruud model #RCBA 2457GG14 with a serial #...

What size & type of bolt [ 1 Answers ]

I am trying to remove the starter on my Craftsman mower. It has a B&S 12.5 hp I/C engine about 12 yrs old. I need to replace the cog wheel on top of the starter. My cheapo hex key set will not fit, what size specifically do I need to remove the two bolts holding the starter?

Pipe size and connection type [ 2 Answers ]

I am plumbing a bath in my unfinished basement. The drains are existing but need to plumb the hot and cold water supply. The question is, the house has been plumbed with pex (its a flexible colored pipe - red for hot and blue for cold). Should I use this type of pipe? If so, should I run 3/4" to...

What size/type of gas line? [ 5 Answers ]

I have a 200lb tank against the middle of the house in the backyard. Now that it is nearing empty I would like to move it to the side of the house. It will be 10' away from my central air conditioner compressors, which is the required distance in my area. Right now, coming out of the tank is...

View more questions Search