Ask Experts Questions for FREE Help !
Ask
    sap101's Avatar
    sap101 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Nov 13, 2008, 12:54 PM
    Bryant furnace: Replace Control
    The furnace shut reported a "Replace Control" code. I cut the power to the furnace and then restarted and it has been functioning normally for the past few hours. Can this furnace give false codes for any reason?
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Nov 13, 2008, 02:25 PM
    Where did you get that code from? The furnace or the thermostat?
    sap101's Avatar
    sap101 Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Nov 15, 2008, 04:54 PM
    Quote Originally Posted by hvac1000 View Post
    Where did you get that code from? The furnace or the thermostat?
    From the furnace
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Carrier/Bryant Furnace control board . [ 9 Answers ]

I replaced Carrier/Bryant board and the led is flashing rapidly.. what can be wrong? It looked like there's problem with polarity,but everything is fine, the led is still flashing.. uff.. Led Code: Continuous on rapid flashing-Line voltage 115 polarity reversed.If twinned,refer to twinnig kit...

Bryant Furnace Plus 80 [ 2 Answers ]

Hi Experts, Can you guys please give me hand? Here's my problem, I have Bryant Furnace Plus 80, it's about 8yrs old. It worked so great until last week, the digital thermostat went dead, it didn't show any numbers on the screen, I thought maybe it's dead, so I went to the store and bought a new...

Bryant 90+ control board relocation [ 2 Answers ]

Hello, I am replacing the control board in my 10 yr old Bryant 350MAV furnace. I was given a kit to relocate the control board "into the blower area" I can't believe I'm suppose to install next to the main blower. Let's face it, even with a regular new filter, it's dirty in there and there is no...

Bryant gas hot air furnace [ 1 Answers ]

I have a bryant gas hot air furnace model #397HAW036100. It has been nothing but trouble since day 1. here's my problem this year again. Purge fan kicks on gas valve goes on to pilot lights. Clicks on gas valve and pilot goes out. Does this about 6 times before it locks out. Last couple years...

View more questions Search