 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Need to identify pool maker
We got a 24' round pool cheap from a second hand owner. No manuals. Has stickers on top rail that say SPLASH. It is not a pool from splash pools in Wichita Falls TX nor Lawton OK. Bottom rails busted on two rails. Need to replace. Local pool companies are no help.:( :( :(
|
||||
|
||||
|
Second hand pools are almost always going to be a headache, depending on the age you could be dealing with a lot of rusted screws etc, a new liner. Honestly I would take the pool metal to a scrap yard and get some money for the metal and invest that money into a new pool. The pump and filter (if you have them) can either be used on the new pool or you can sell them for more money towards a new pool as well. |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Simply; if anyone reading this is interested in starting a pool hall in indianapolis please reply. My name is lucas I have been around pool for over ten years and I currently work at a pool hall on the east side. My funds are low but, my will is high. I have several good ideas. Contact me...
I have attached an image of the "well" (for lack of a better description) in my pool house. I have asked two different pool companies what it is and neither one knew. We moved into this house with the existing pool 5 years ago. The well has never overflowed until this year. (Like much of the...
We are going to install a new liner in an above ground pool this weekend. I have read conflicting information as to when the skimmer and jet holes should be cut. Do you fill the pool with water within a foot of the skimmer, attach the trim kit and then cut out the liner? I don't know what to do,...
Can anyone tell me where to find the spitters that send streams of water over the pool. Thanks, Judy
View more questions Search
|
