Ask Experts Questions for FREE Help !
Ask
    Rollout's Avatar
    Rollout Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Oct 28, 2008, 05:22 PM
    Installing a new furnace
    I just received a quote on the installation of a new furnace. The home is small (940 s.f.)

    The quote was for a single stage Goodman, 80% eff. 70k BTU. The furnace sells on-line for $625.00. The quote was $2100.00. Seems high. Any advice?

    Thanks - Rollout
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
    		  
    #2

    Oct 28, 2008, 05:44 PM

    Is this a replacement? Or are you needing ductwork vents and all
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #3

    Oct 28, 2008, 06:16 PM
    Unles you live in Alaska 70,000 BTU is a big furnace for your area.
    Rollout's Avatar
    Rollout Posts: 2, Reputation: 1
    New Member
    		  
    #4

    Oct 30, 2008, 10:18 AM
    [QUOTE=wmproop;1345522]is this a replacement? Or are you needing ductwo
    This is a replacement Thanks - Dave
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
    		  
    #5

    Oct 30, 2008, 05:10 PM

    Seems high to me also, I would get at least 3 price quotes from 3 different companies,, keep in mind the installation quality is very important.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

York Stellar Furnace Heating up Furnace Room to 110 Degress? [ 2 Answers ]

I have a York Stellar Furnace in my newly purchased house. Furnace is 15 years old. Furnace is releasing hot air from front grills and heats up furnace room to 110 Degrees. I had a Bryant Furnace in another house and this never happened. All plenams and ducts are taped and sealed so the heat is...

Goodman furnace GMNT080-4 furnace runs good for a while then has to be manually reset [ 5 Answers ]

I have a Goodman GMNT080-4 (90%). I'm having the same problem As Streatherg did back in the Nov 2006 question. I reviewed his article and tried Every thing on there but seems to be doing the same thing. The furnace kicks on for about an hour then locks out and has to be manually reset threw...

Furnace not heating the house. Damper on the furnace not opening. Motor then shuts. [ 4 Answers ]

My forced-air furnace is not working correctly. The gas works heating the air in the furnace, but When the motor starts the damper doesn't open and the Motor shut down. I need suggestions?:mad:

Installing transfer switch at gas furnace [ 2 Answers ]

I purchased the Reliance TF201W Easy / Tran switch. I'm planning to install it so I can run my gas furnace off my generator via extension cord this winter if necessary. The installation instructions show the switch being wired into the breaker panel. My breaker panel is in a finished basement...

Comfortmaker Furnace Fan blows in line fuse and will not allow furnace to work [ 1 Answers ]

I have a Comfortmaker Furnace (approximately 1998/99) and the fan will not turn on allow the furnace to heat. When I try to turn the furnace on it blows a 3 amp fuse at the blower motor. I removed the fuse and jumped it and all it will do is make a faint buzzing noise and not turn on. I can...

View more questions Search