Ask Experts Questions for FREE Help !
Ask
    dale3's Avatar
    dale3 Posts: 12, Reputation: 1
    New Member
    		  
    #1

    Oct 25, 2008, 07:51 AM
    Pressure switch
    Hi everybody
    I am glad to find this site. I hope I can help others in the future. I have a bryant furnace that I am having problems with. The pressure switch is staying closed after the furnace has completed a cycle. Therefore the furnace will not start another cycle. If I take off the tubing going to the burner box I can here the pressure swith close and the furnace will start and compleat a cycle. I removed 2 screws from the cover on the burner box and that also relieved the pressure so it will run. I checked the flue pipe and it looke to be clean. I also made sure the ports was clean and the tubing was clear. Also I did not see any sags in the pipe. The furnace is about 4 years old and has been running fine.

    Thanks for any help!
    dale3's Avatar
    dale3 Posts: 12, Reputation: 1
    New Member
    		  
    #2

    Oct 25, 2008, 07:56 AM
    Sorry
    I meant to say I could here the switch open after taking the tubing off the burner box.

    Thanks!
    dale3's Avatar
    dale3 Posts: 12, Reputation: 1
    New Member
    		  
    #3

    Oct 26, 2008, 01:07 PM

    PRO'S
    Any ideas?

    Thanks a lot!
    dale3's Avatar
    dale3 Posts: 12, Reputation: 1
    New Member
    		  
    #4

    Oct 28, 2008, 04:47 PM

    Any help would be appreciated.

    Thanks!
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Deep well, pressure tank/switch not building pressure [ 13 Answers ]

The only way I have water pressure is to leave the power on! I have replaced the 5 gallon pressure tank (28psi when void of water)/fittings/pressure gauge and tried 3 new 30/50 pressure switches and the problem remains the same. With the power off, the pressure drops to 0 (not 30). When I...

Goodman limit switch/pressure switch? [ 2 Answers ]

Hi, I've got a goodman furnace (mod. # GHT070-3) it's about 5 years old. Recently, the heat will only kick on for about 30 seconds then shut off. It's giving me 4 flashes: Open limit switch, then it kicks off. After that it gives me 3 flashes and turns back on (pressure switch). It seems the...

Pressure switch? [ 5 Answers ]

well was drilled in 1972 changed pump 2x.everthing OK till just the other day switch started 2 kick in & off ever few seconds.just put on new switch ,still doing same thing.well tank has 30lps pressure.water flow still good.can someone help?

Pressure switch [ 2 Answers ]

Furnace guy was here Wednesday, pressure switch need cleaned (he did it) all was well for a day. Having same problem again. Indicator light confirming this. How do I un stick the pressure valve/switch? Trane XE 90 model. Do not want to afford a service call when sure of the problem. Any help...

Limit Switch - Pressure Switch [ 0 Answers ]

Hello Folks, This weekend I've been playing with a heating system at my new apartment and I'm trying to figure out what the different componets do. I kind of followed the circuit but still have some missing links... 1-There are some terminals on the furnace's circuit board labeled LIMIT. The...

View more questions Search