Ask Experts Questions for FREE Help !
Ask
    carterseyes's Avatar
    carterseyes Posts: 8, Reputation: 1
    New Member
    		  
    #1

    Oct 24, 2008, 01:26 AM
    Allowable # of romex in a 2" romex connector
    Hi, I would like to know the maxamum allowable romex wires can be secured in a 2" romex connector. Thanks
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
    		  
    #2

    Oct 24, 2008, 02:39 AM
    One.
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #3

    Oct 24, 2008, 02:06 PM

    Good one, sort of like how much voltage insulation will 6 wraps of 600 volt tape provide.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

NM-B Romex for spa [ 17 Answers ]

I am running NM-B #6 3 wire w/ground from my panel to a J box that exits the house (all indoors at this point). From that point I have about a 40 ft. run to the spa. I have trenched and laid conduit for the remainder of the run. Can I remove the sleeve on the NM-B Romex and use this wire for the...

SEU & Romex [ 1 Answers ]

Can SEU and NMB cable be uses interchangely for a 60 amp, 240 volt circuit.

Romex to spa box [ 7 Answers ]

I am mounting a spa box on a new exterior wall. I have 6-3 +gnd romex wire running from the panel to the box. I want to bring the wire from inside the wall right into the back of the spa box. Is this okay? I have noticed some spa boxes have knock-outs on the back while others do not. If I do...

Romex or bx [ 1 Answers ]

Hello, My niece is having some electrical work done in her hi rise condo, in manhattan NYC I notice romex cable being used, I always thought bx cable was code for NYC Any info is appr. Thank you

How to run my romex [ 2 Answers ]

I have 15 outlets and 12 lights. I am running 14/2 for the lights and do I run this to the smoke dec. to Right? Then I am running 12/2 for the outlets. Can I tie all the outlets into one circuit, and how many amps --same with the lights. -or--- should I run 2 circuits and split the outlets in half...

View more questions Search