Ask Experts Questions for FREE Help !
Ask
    bryan123's Avatar
    bryan123 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jun 26, 2006, 07:28 AM
    Light works but fan doesn't
    Hi all I have a Hampton Bay 60 In. Ancient Bronze St. Regis Fan and the light works but fan doesn't when I press a button on the remote to turn fan on the fan makes a clicking noise it just clicks once... anyone know what could be wrong? We don't have a wall switch. And the fan is indoors.
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #2

    Jun 26, 2006, 08:21 PM
    If it clicks but the fan does not operate it sounds as though something is wrong with the receiver or fan itself. Check to make sure all the wires are firmly connected, and if that isn't the problem you may want to get a new fan under warranty.

    http://www.ceiling-fans-n-more.com/c...e-controls.php
    bryan123's Avatar
    bryan123 Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Jun 27, 2006, 04:34 AM
    Well my mom's friend is coming here today he is kind of a eletricatl so he will check the wires. And this fan is under lifetime warranty.
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #4

    Jun 27, 2006, 12:14 PM
    Report back if you get it working :)
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Hampton bay ceiling fan-light works-fan doesn't [ 6 Answers ]

I installed a new Hampton Bay ceiling fan outdoors and the light works from a wall switch but the fan doesn't work at all. There is a white, black, red and ground wire coming from the ceiling. There is a white, black, black/white stripe (light) and green ground coming from the fan. I attached...

Ceiling fan works properly only when light is on [ 3 Answers ]

I just installed a ceiling fan, and though the fan works great when the light is turned on, when the light is turned off, all power seems to be drained from the fan. I've tried to rewire, but no luck. And when the light and fan are on together, any small imbalance in the "fan" disappears. Does...

Fan works but light doesn't. Fixed and now the light works but fan doesn't [ 9 Answers ]

While I was at college somehow my fan stopped working. There is absolutely no explination from anybody but my mom did get a replacement so I didn't care too much. The fan has a ground from the mount(copper), ground from the middle of the fan(copper), a hot for the light(blue), hot for the...

Bathroom fan/light: light works, fan doesn't [ 3 Answers ]

I'm back with more "finishing basement" questions. This weekend, I wired my bathroom. This is 20 amp service with 12 ga wire. For the bath fan/light, the power source came into the switch box (1 box, 2 switches) on a 12/2 wire. From there, power goes up to the light/fan on a 12/3 wire. Red goes...

Fan works light doesn't [ 3 Answers ]

Any ideas on a windward II fan/light combo remotely controlled. I have changed batteries in remote, checked bulb and got a new bulb, when Press the light button on remote I get the light display and brightness but no light comes on. I was wondering if it might be the ballast, It is a 9"...

View more questions Search