Ask Experts Questions for FREE Help !
Ask
    Randy17090's Avatar
    Randy17090 Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Oct 21, 2008, 09:07 AM
    Old Intertherm t-stat out,what to put in?
    I have a mobile home with an Intertherm furnace, used for both heating ond cooling. I have one T-stat that controls which function is to be used,(heating/cooling). This one controls the cooling temp,and fan. I have a second T-stat that controls the heat temp. It is an old two wire mechanical and I would like to replace it. Could anyone tell me of any replacement ones.
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Oct 21, 2008, 10:39 AM
    Usually any heat only thermostat will work. Does your furnace have a heat/off/cool switch on it?
    Randy17090's Avatar
    Randy17090 Posts: 3, Reputation: 1
    New Member
    		  
    #3

    Oct 21, 2008, 10:53 AM

    YES. THe main t-stat has the heat/off/cool switch. I purchased a very basic heat only, but with negative results. The one I purchased was a 24volt. Is it possible that the old heat t-stat is dry contact only,spring tension operated.
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #4

    Oct 21, 2008, 10:58 AM
    Is it possible that the old heat t-stat is dry contact only,spring tension operated.

    Yes
    Randy17090's Avatar
    Randy17090 Posts: 3, Reputation: 1
    New Member
    		  
    #5

    Oct 21, 2008, 11:04 AM

    I'll check on that. Thank you very much for the info.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Unlocking my T-stat [ 3 Answers ]

The company I work for has a Honeywell Vision Pro TH8000 Series thermostat that has been locked out. I am the maintenance tech for the facility and need to lower the room temperature for the room it supplies. Locked out meaning the temp. arrow buttons do not make any changes. It is imperitive once...

18-3 t stat [ 1 Answers ]

I have 18-3 coming out of the wall the problem is I have a new digital thermostat with no directions and I did not remove the old t-stat how do I find out what wire is what I live in a apartment with base board heat

Just 3 wire T-Stat connection, new stat, diff letters [ 6 Answers ]

Hi all, I've done tons of reading and can't find my specific wiring, tstat combo to figure it out... hopefully someone can shed some light on it for me. Natural gas forced air furnace, no air conditioning. Had a honeywell for the last 9 years, easy install, labelled easy. (but its dead) Wire...

Need help with H-Well T8624D t-stat [ 5 Answers ]

I'm working at a non-profit in New York City. Recently I purchased three Honeywell T8624D's to replace our Honeywell T874D's. Then we'll have programmed on and off times and I won't have to go into each mechanical rooms to tend to the units. The wiring looks very straightforward and I tried...

View more questions Search