Ask Experts Questions for FREE Help !
Ask
    viktar's Avatar
    viktar Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 19, 2008, 11:22 AM
    Furnace NUGK100DH08 does't work
    My furnace NUGK100DH08 does't work. Ignition spriks , blower works. But no gas goes throuw . And no flame on the pilot.
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Oct 19, 2008, 06:43 PM
    No gas available to burn ?

    Bad valve?
    Bad wiring to valve?
    Defective safety device?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

A/c unit does't work [ 4 Answers ]

Hi, my name is mike and I have a lennox a/c unit that won't kick on , the inside blower Fan works but out side fan doesn't. All I hear is a click. A friend told me to replace The capacitor first. I replaced it and have the same problem.

Does anyone know if you can borrow against a 401k if the employer does't make loans [ 4 Answers ]

Does anyone know if you can borrow against a 401k from anyone if the employer does not make loans against a 401k

Gas Furnace Fan won't work [ 4 Answers ]

My American Standard furnace fan won't turn on. It will ignite, when it gets to the blowing stage it will turn off. All breakers check out fine. Can't find any other on/off switch inside unit. A burnt smell comes from vents, the same smell of when you first turn of the heater for the first time...

Comfortmaker Furnace Fan blows in line fuse and will not allow furnace to work [ 1 Answers ]

I have a Comfortmaker Furnace (approximately 1998/99) and the fan will not turn on allow the furnace to heat. When I try to turn the furnace on it blows a 3 amp fuse at the blower motor. I removed the fuse and jumped it and all it will do is make a faint buzzing noise and not turn on. I can...

Fan Doesn't Work When Furnace On [ 3 Answers ]

If I have the furnace on and the fan on "Auto" the fan never comes on. The furnace seems to work fine - the ignitor begins to glow, gas comes on, and burners light. After a while the gas stops for a time (before coming back on) but the furnace seems to run continuously If I turn off my furnace...

View more questions Search