Ask Experts Questions for FREE Help !
Ask
    lschwart's Avatar
    lschwart Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 13, 2008, 03:06 PM
    Reco on model 44260
    What does 'reco' flashing on my hunter model 44260 thermostat mean? I have changed the batteries and it seems to have solved the problem.
    Thanks
    Leslie
    Missouri Bound's Avatar
    Missouri Bound Posts: 1,532, Reputation: 94
    Ultra Member
    		  
    #2

    Oct 13, 2008, 04:38 PM
    It means your thermostat is in "auto recovery" mode. It can be disabled through a switch on the circuit board... look at your users manual.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Luxpro thermostat to hunter 44260 [ 4 Answers ]

OK I have looked everywhere and crossed reference as many charts as I can but I still can not seem to find a definite wiring diagram for this. My old Luxpro wiring goes like this and it makes sense. RED WIRE connected to R GREEN WIRE connected to G ORANGE WIRE connected to O WHITE WIRE...

Installing Hunter 44260 thermostat [ 2 Answers ]

I bought a house with 6 wires coming out of the wall they are White, Yellow, Blue, Brown, Red, Green My Hunter 44260 has inputs for G,RC,RH,Y/O,W/B,Y1 I'm not sure how to wire this? I have a air conditioner and gas heater not sure what else Please help

Replacing an old Honeywell Thermostat with a Hunter Model 44260 to a York Heat Pump [ 0 Answers ]

I have an older Honeywell thermostat with wiring G(green) W(white) R(red) X(blue) B(black) O(orange) & Y(yellow). My new programmable thermostat Hunter 44260 has G R/C R/H Y/O W/B & Y1. Which wires go where on the new 44260 thermostat? The manual is not easy to understand. Thanks! D

View more questions Search