Ask Experts Questions for FREE Help !
Ask
    salvo5's Avatar
    salvo5 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 11, 2008, 06:47 PM
    Bathroom Wiring
    I am remodeling a bathroom including installinf GFCI outlets, new lights, vent and switches. Can I use 12/2 NMB wiring or does it need to be NMC?
    Missouri Bound's Avatar
    Missouri Bound Posts: 1,532, Reputation: 94
    Ultra Member
    		  
    #2

    Oct 11, 2008, 08:02 PM
    As long as local codes allow romex, it would be just fine in your bathroom.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Wiring a New Bathroom Fan [ 5 Answers ]

Need a master bedroom bathroom fan to control humidity. New install and plan to have a timer vs a switch. Have one light fixture on wall over bathroom medicine cabinet. This fixture is controlled by a switch located just outside of the bathroom and there is 1 black wire in and then 1 out, so I...

Bathroom wiring [ 1 Answers ]

I am wiring an elecric towel rail & blanket underfloor heating in a bathroom, I know this has to be done to IEE standards trough a flex outlet & an external fused connection unit. I just looking for conformation on what height I should put the flex out let in the bathroom. I am in Scotland, I...

Bathroom Wiring [ 1 Answers ]

I have read as many bathroom posts as I could find but still have a specific question. First I want to reiterate what I have gathered. Please verify the following for correctness. 1. Outlets and lights must be on separate circuits in a bathroom. 2. All outlets must be GFI protected by breaker...

Need help wiring a bathroom? [ 6 Answers ]

I am installing a new bathroom in my basement and have a few questions. First a little information on the circuits. The bathroom will have 2 circuits. Circuit-1 = (2) GFCI's one on each side of vanity top. No lights, switches or appliances on this circuit. Circuit is dedicated only to the...

Bathroom wiring [ 2 Answers ]

First question was answered somewhat,here's the scenario,remodeling bathroom,ran 20 amp service,wired in fan/light .light is wired for use by itself.Fan,light in tub,shower,vanity light and three outlets [one outlet is gfci,20 amp rating. Would like to use 15 amp switch for general light,this is in...

View more questions Search