Ask Experts Questions for FREE Help !
Ask
    pipfre's Avatar
    pipfre Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 9, 2008, 03:13 PM
    Gas furnace pilot
    MY GAS FURNACE PILOT WILL NOT STAY LIT..

    THX for any input help... PIPFRE
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    Oct 9, 2008, 03:24 PM

    Most likely source of the problem is a thermocouple. They are only a few dollars at most any hardware store.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

My intertherm furnace pilot lights but furnace won't kick on [ 5 Answers ]

I need some diagnostic help. We have a full propane tank. A new burner plate (last year) and the blower works. We light the pilot but the knob should pop up after one minute thus lighting the furnace. It won't pop up. What part should we replace? The furnace is a 17 year old Intertherm MGH...

Furnace pilot [ 1 Answers ]

Gas furnace / pilot goes out after temperature is satisfied.

Gas furnace has an intermittent pilot, pilot lights, furnace tries to start [ 3 Answers ]

Have a 25 plus year old furnace pilot will start when signal sent furnace tries to start makes noise as it tries over and over but will not start. Thanks

How do I light the pilot on a gas furnace? [ 1 Answers ]

I have a 25 year old or more Lennox Furnace. G10-137V-1 The pilot will not lite when I turn it to the pilot position and press down as directed

Gas furnace pilot trouble. Goes out while furnace is running! [ 1 Answers ]

About a month ago I put in a new thermocoupler in my furnce and it's been working fine. This morning I woke up to no heat. I can re-light the pilot with no problems. The piot light keeps on burning if I don't turn the thermostat up to turn on the furnace. Then when I set the thermostat to 70...

View more questions Search