Ask Experts Questions for FREE Help !
Ask
    hfd098's Avatar
    hfd098 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 8, 2008, 07:19 AM
    Hot water heat
    I have a 2 zone hot water system in 1 zone 1 radiator does not get hot I've bled the air out any ideas
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Oct 8, 2008, 07:54 AM
    Could be the pressure regulator on the water feed line to the boiler. It is possible the pressure is to low or you could still have air in the system that has not released yet.

    Warning: If you do not really know what you are doing I would call for ON SITE service.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

New hot water heater but I only get hot water when the heat is turned on [ 3 Answers ]

I live in an apartment that was recently gut renovated and I have a new hot water heater as well. The issue is that I have to turn on the heat in order to get hot water in the shower, kitchen and bathroom sinks, otherwise the water is cold. When the heat is on, the water is very hot, but...

Hot water heat [ 1 Answers ]

We have a older hot water heating system it was working fine but now there is no circulation. I heard this can be like a vapour lock, if this is it how can we fix this? Do we have to drain the system? Is there a different way? How do you bleed the system? Thanks for taking the time to help.

What to do with Hot water Heat ? [ 3 Answers ]

I have an apartment building which has a boiler providing hot water heat to 2 units. I want to split the gas up, as I am paying a lot for heat. I can add another meter, but I am not sure what to do for heat. Here is what I am thinking : 1. Have the current boiler heat the first floor,...

Hot water heat [ 2 Answers ]

I have hot water baseboard heat and I can't get the air to bleed from my system. I have tried to let the bleeder valve open. But it just won't bleed off.

View more questions Search