Ask Experts Questions for FREE Help !
Ask
    JGenese's Avatar
    JGenese Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Oct 4, 2008, 08:56 AM
    Goodman Model gmpn series heats then just stops
    My unit will kick on and heat and then it will just stop working. Indicater light on board shows solid red as if everything is normal. Any Ideas?
    JGenese's Avatar
    JGenese Posts: 2, Reputation: 1
    New Member
    		  
    #2

    Oct 4, 2008, 09:02 AM

    Also this is natural gas with a heat plug to ignite the gas.
    MarkwithaK's Avatar
    MarkwithaK Posts: 955, Reputation: 107
    Senior Member
    		  
    #3

    Oct 4, 2008, 06:34 PM

    Could simply be a dirty/faulty flame sensor. If the sensor goes bad or gets dirty the burners will ignite but then shut off after a few seconds. Does this sound like what you are experiencing?
    lawster144's Avatar
    lawster144 Posts: 2, Reputation: 1
    New Member
    		  
    #4

    Oct 15, 2008, 10:22 AM
    I am having the same problem where is the flame sensor?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore Dryer - heats & runs but stops mid-cycle [ 12 Answers ]

I have been trying to figure out what exactly is up with our Kenmore dryer. We bought it new in 1997 and it has run like a champ till now. It still heats up and the drum still tumbles. In the regular drying cycle - you set the timer for 60 minutes and about 15 minutes into the cycle, the dryer...

Goodman Heater runs 5 sec, 3 cycles and stops [ 5 Answers ]

I have a goodman forced air furnace and it lights up for 5 secs... shuts down... 3 cycles of this and stops. I cleaned the heat rod with NO success and was just wondering if I should buy a new heat rod (where if so) or may it be another issue? THanks David

Goodman GMPN won't fire [ 3 Answers ]

Trying it for the first time this year, unit is 9 years old. The furnace blower keeps running but there's no fire and after a few minutes it cuts off. LED is solid. Could the ignition switch be shot? Thanks.

Kenmore Series 70 Heats but doesn't dry [ 5 Answers ]

I have a Kenmore series 70 that will get real hot inside the tumbler but keeps all the moister inside and the laundry will not dry. There is an air flow coming out of the back exhaust with no problem. Can anyone tell me what is wrong with my mechine, I do not want to waste time and money if I can...

View more questions Search