Ask Experts Questions for FREE Help !
Ask
    blessedmom's Avatar
    blessedmom Posts: 104, Reputation: 6
    Junior Member
    		  
    #1

    Jun 12, 2006, 11:42 AM
    Whirlpool drain
    Hello all,

    I have been in my house for a year now. I have a whirlpool tub that drains very very slowly. It has been that way ever since I have been in this house. The other plumbing in the house is great. I haven't had any problems. The other tub in drains fast... normal. Can anyone help me with this problem? Any and all help would be greatly appreciated! Thank you!

    Blessedmom
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #2

    Jun 12, 2006, 01:50 PM
    To clear the drain you must pull the chrome overflow plate and send a snake down the open hole. About 18 inches down you'll run into the traps return bend. Crank and push your way around it. Once around the trap put out about 8 foot more. Have plenty of old rags when you pull the snake back, it will be all black and greasy. Flush the drain out with a few large pans of boiling water. Good luck, Tom
    blessedmom's Avatar
    blessedmom Posts: 104, Reputation: 6
    Junior Member
    		  
    #3

    Jun 12, 2006, 03:02 PM
    Thank you Tom. I will try this.
    blessedmom's Avatar
    blessedmom Posts: 104, Reputation: 6
    Junior Member
    		  
    #4

    Jun 16, 2006, 03:07 PM
    When I open the chrome plate can I pour draino or bleach in there and then rinse it with boiling hot water?
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #5

    Jun 16, 2006, 03:24 PM
    Quote Originally Posted by blessedmom
    When I open the chrome plate can I pour draino or bleach in there and then rinse it with boiling hot water?
    No, removing the chrome plate will give you the opening you'll need to snake out the drain line. I am no fan of putting harsh chemicals in your drainage system. They only seem to work in TV commercials. However, if you're going to use chemicals pour them down the drain, let it set overnight and next morning flush it out with a few large pans of boiling water. Good luck, Tom
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Whirlpool washer will not agitate but will spin and drain [ 3 Answers ]

Model# LA5530XSW2 My washer will fill up but will not agitate, you can hear a humming noise and can smell something. It will drain & spin just not agitate. Please help me how to resolve this problem. Thank you

Moving drain in custom shower, whirlpool tub and toilet on concrete slab [ 4 Answers ]

I am finalizing plans to update a master bathroom that sits on a concrete slab. My question is: can shower, whirlpool tub and toilet drain holes be moved without drilling into the concrete? If so, what is the maximum amount that the holes can be repositioned without having to drill? I would...

New whirlpool tub in basement [ 9 Answers ]

My husband and I are attempting our first DIY remodeling project... adding a bathroom in the basement. The drains are all roughed in and we have gotten most of the supply lines in. My question is... we put in the stringers for the new whirlpool tub and did a "test fit". The drain in the tub...

Change drain location for New Whirlpool Installation [ 1 Answers ]

My project involves removing an existing 5 foot by 28 inch wide bath tub and installing in its place a 6 foot by 36 inch whirlpool. I have check out all the details and I have the room needed to fit the tub and do the installation properly and also handle the electrical. However I am a novice when...

Whirlpool drain [ 3 Answers ]

My whirlpool tub is slow in draining and I want to remove the whirlpool drain plug so I can clean it. Unlike sink drains I can't remove the plunger holder and remove the drain plug... it doesn't have a one. It works on the gravity principal... pull it up and set in on stop while the tub drains. How...

View more questions Search