Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Replacing old honeywell thermostat with new programmable
[ 3 Answers ]
Hello, I am in the process of replacing an old honeywell thermostat (Q539A1014) that was installed by a HVAC prof. about two years ago. We wanted to upgrade to a programmable thermostat. We purchased a RTH6300B Honeywell. I was told by the home improvement store this was compatible and...
How do I match wiring when replacing a programmable thermostat?
[ 6 Answers ]
Had to replace the programmable thermostat. Instructions weren't clear to me as far as what jumper settings of on or off looked like. Does "on" indicate placing the plastic piece over the jumper posts? I have 5 wires, White, Yellow, Red (which was connected to RH, then had a piece of wire...
Replacing Analog Thermostat with Non-Programmable Digital Thermostat
[ 1 Answers ]
Replacing Analog thermostat with White, Yellow, Red, & Black wiring with non-programmable digital thermostat Model #RTH3100C. Please help!!
Programmable Thermostat
[ 4 Answers ]
Hi.. I have the EWC-ST-2D which I want to replace with Programmable Thermostat from Honeywell. The current list of wires are yellow, blue, red, white, green and brown. On the programmable thermostat, I have R, Y, W, G. But where does the Blue and Brown go. I do have Y2 and W2 and C. ...
Programmable thermostat
[ 3 Answers ]
I have a programmable thermostat , but the digital readout says 24.5 degrees all the time. The readout does not change when the temp in the house does. Any suggestions? Markus View more questions Search
|