Ask Experts Questions for FREE Help !
Ask
    violet0019's Avatar
    violet0019 Posts: 208, Reputation: 9
    Full Member
    		  
    #1

    Jun 11, 2006, 12:19 PM
    Rust Stop Type Of Product... drying Time
    When my Son uses the Rust Stop type of product, after he has removed the loose rust with sandpaper... how long does he have to wait after spraying it on, for it dry and then after it dries, does he have to sand it before beginning with the body filler work? THANKS:confused:
    shunned's Avatar
    shunned Posts: 268, Reputation: 20
    Full Member
    		  
    #2

    Jun 11, 2006, 06:15 PM
    I would spray it on as soon as it's clean and dry. I would not sand it unless it "ran".
    bhayne's Avatar
    bhayne Posts: 339, Reputation: 4
    Full Member
    		  
    #3

    Jun 12, 2006, 09:09 AM
    That rust stop isn't like ordinary primer. I believe it wants a 24hr drying time. I thing it actually reacts with rust to make it inert.

    24Hrs unless the directions say otherwise.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Whirlppol dryer not drying [ 2 Answers ]

I have a whirlpool dryer about 3.5 years old. The last 2 weeks it takes 2.5 hours to dry one load. I have cleaned all possible vents, the element still heats, it just doesn't dry! Very frustrating.:mad: Any help would be great! Thanks:)

Dryer not drying [ 1 Answers ]

My frigidaire dryer is heating but not drying in the appropriate time. It takes forever for the clothes to dry. Could this be the heating element?

Name-type Of Mask?to Use-rust Removal/painting Etc. [ 3 Answers ]

Any suggestions, advice, experiences with mask(s) to purchase for my teenage son to use when he is going to work on my car? I want to have a mask(s)ready and available immediately when he begins. Thank you - I appreciate all the replies I receive! Someone mentioned a "cartridge" type of mask.....

Dryer not drying, heating [ 3 Answers ]

Help! I would like to fix this myself! My electric dryer is heating, but not drying my clothes. My lint trap is always clean every time I check it- which is weird because usually it needs to be cleaned between loads! When I open my dryer door (my dryer keeps going even when I open the door-...

Dyer Not Drying [ 3 Answers ]

I put the hose to the dryer and the other end that is attached to the house. I made sure it was secure. Once today the dryer was not even warm and I checked that hose and it had popped off. I replaced it. Now my close are drying, but at a slow rate and the hand dial thing is not moving closer to...

View more questions Search