Ask Experts Questions for FREE Help !
Ask
    seeths's Avatar
    seeths Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Sep 18, 2008, 12:39 PM
    Frigidaire gas furnace FG6RA 096C 10B too noisy
    I recently got a Frigidaire 2 stage furnace, FG 6RA 096C 10B, installed. It is very noisy. The installer says it is because of the high powered motor. The noise drives me crazy. Can anything be done about it? Secondly, how do I set the fan to work continuously?

    Thank you.

    Seeth
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    Sep 18, 2008, 12:47 PM
    The fan setting should be on your thermostat. Look for a small slide switch mark AUTO?ON, move it to ON for 24/7 operation which is what I recommend for most home owners. Noisy is kind of relative. A 2 stage fan does make more noise when on high because its moving a great deal more air. Ask a factory rep from the manufacturer to visit your home and measure decibels and compare to factory stats.
    seeths's Avatar
    seeths Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Sep 18, 2008, 01:52 PM
    Quote Originally Posted by ballengerb1
    The fan setting should be on your thermostat. look for a small slide switch mark AUTO?ON, move it to ON for 24/7 operation which is what I recommend for most home owners. Noisy is kind of relative. A 2 stage fan does make more noise when on high because its moving a great deal more air. Ask a factory rep from the manufacturer to visit your home and measure decibels and compare to factory stats.
    Thank you very much for your quick answer.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Noisy AC - Furnace fan motor [ 1 Answers ]

The fan starts making noise... then, all of a sudden, the noise is reduced to a loud hum. The unit is typical of a residential home heating and ac unit. Split system for cooling and gas for heating. Not a heat pump.

Noisy furnace fan [ 1 Answers ]

My gas furnace motor has become very noisy something is rattling inside. I have removed the casing to the fan and squirrel cage is able to turn on the shaft. There is a locking ring with a small bolt but tightening this only locks it to the shaft, the cage is still able to turn on the shaft. I...

Noisy(?) New Furnace [ 1 Answers ]

So, I have this new 95% Efficient York Infinity 9M modulating furnace recently installed. All seems to work but the noise when it runs (at the "low stage", I think) is "whirry" and just plain hard to get used to. It's not that loud, there are no vibrations, but there is just a constant machinery...

Noisy furnace [ 1 Answers ]

I have a Trane XE 70 furnace, manufactured around 1990. It has been serviced yearly since I purchased the home 6 years ago. About 2 months ago it began making a low pitch rumble after the burners ignite and before the fan kicks on. The rumble occurs 35 seconds after the burners ignite and lasts...

Noisy furnace [ 1 Answers ]

My furnace makes a banging/popping sound when it starts up and when it shuts off. What causes this?

View more questions Search