 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Six month old dishwasher. Worked fine until today - won't start. LIghts are on and control panel seems to be working OK. The "Clean" indicator is flashing in intervals of 7 flashes and then pauses. When I select the "Start" button it flashes red 3 times and then nothing. The "Drain/Cancel"...
I am experiencing weird problems with my top of the line Kenmore Elite Catalysts washing machine. I bought the washer and dryer as a pair for about $1700 in 1999. The dryer model # is 110.60936990 but the sticker has worn off the washer so I do not know the model #. I think it could be...
I would like to install a microhood with an electric range I just purchased. I am getting conflicting information as to the amount of clearance needed for this. Some people say you need at least 16" from the top of the range elements to the underside of the microhood. Others have said that as...
I am having a microhood installed over my electric range and need to know the minimum clearance that's possible so as not to ruin the microhood.
I am planning to upgrade my kitchen & I want to replace my fan hood with an over the stove microwave oven. The fan hood that is now in place vents to the outside through the house wall. The cabinet over the fan is 18 inches high and I plan to replace it with a 12 inch cabinet to accommodate the...
View more questions Search
|
