Ask Experts Questions for FREE Help !
Ask
    1EVAD's Avatar
    1EVAD Posts: 13, Reputation: 1
    New Member
     
    #1

    Sep 12, 2008, 11:54 PM
    To many curves?
    Im going to attempt to install a toilet drain.it's about 8-10 feet from the main stack.it looks like I need to make 2 90" turns to make it there.will this work or will I end up with an endless clogged toilet.(lots of work to end up that way)YIKES.any help would be appreciated.
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
     
    #2

    Sep 13, 2008, 04:46 AM
    If you can make the bends with 45's or sweeps I would use them instead of 90's. Can you give us a diagram? Regards, tom
    mygirlsdad77's Avatar
    mygirlsdad77 Posts: 5,713, Reputation: 339
    Plumbing Expert
     
    #3

    Sep 13, 2008, 01:26 PM
    Speedball is right on. However, yes it will "work", if you have limited space. I wouldn't worry about it being a problem for plugging. Since you have 8-10 feet before tie in, you should be able to make the 45s work just fine.
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
     
    #4

    Sep 13, 2008, 03:48 PM
    Both good posts, the less you use 90s the betteroff you'll be.
    massplumber2008's Avatar
    massplumber2008 Posts: 12,832, Reputation: 1212
    Senior Plumbing Expert
     
    #5

    Sep 13, 2008, 05:02 PM
    1Evad...

    Use 45s as posted or can prime/cement a regular 45 into a street 45 and make your own long sweep 90s

    Is there another bathroom above this bathroom you will be installing the toilet in? How is this toilet getting vented? See if can post a diagram as Speedball1 requested.

    Let us know...
    1EVAD's Avatar
    1EVAD Posts: 13, Reputation: 1
    New Member
     
    #6

    Sep 13, 2008, 10:42 PM
    Quote Originally Posted by massplumber2008
    1Evad...

    Use 45s as posted or can prime/cement a regular 45 into a street 45 and make your own long sweep 90s

    Is there another bathroom above this bathroom you will be installing the toilet in? How is this toilet getting vented? See if can post a diagram as Speedball1 requested.

    Let us know....
    There is another bathroom right on the other side. I'm going to use existing vent.Thanks for everyone's answers. This is great
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
     
    #7

    Sep 14, 2008, 04:53 AM
    there is another bathroom right on the other side. I'm going to use existing vent.
    Please explain with a little more detail? Is there a existing bathroom that you simply wish to move a toilet?> Are you adding a toilet someplace? What "existing vent" are you referring to? The more information we have the better we can frame up our answers. Regards, Tom

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Curves for Women [ 10 Answers ]

I was wondering if anyone has tried Curves? I'm thinking about it. But I want some insider advice. Have you tried it? Did it work for you? Did you like it? Was it expensive?

New Drain - Too many curves? [ 4 Answers ]

Adding a bathroom to my basement and had to move the drain for the shower. The pipe under the cement is cast iron so I am trying not to have to cut it. The Iron pipe has a trap right under where the old drain was, it now needs to be about 18 inches away. Was thinking about how to move it and...

Curves anyone? [ 3 Answers ]

Hello, I'm thinking about joining Curves and am wondering if anyone had any insights to the program or are willing to share their personal experience with it. My main question is... I've never heard of using hydrolic equipment and don't know how it compares to the "normal" equipment found at...


View more questions Search