Ask Experts Questions for FREE Help !
Ask
    taylorttt's Avatar
    taylorttt Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 11, 2008, 06:25 PM
    V Twin 22 HP stopped in its track
    My craftsman V Twin 22 HP Kohler was working and running just fine then stopped running during cutting. No response when turning the inition, had the battery checked all is good. Still no sign of life buzz or clicks. What and where should I begin??

    Thanks
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    Sep 11, 2008, 06:36 PM
    I thought the Sears V twin was a B&S, oh well. Start with your manual and find the small automotive fuse and check it, first place to start.
    Solarrigger2000's Avatar
    Solarrigger2000 Posts: 62, Reputation: 1
    Junior Member
    		  
    #3

    Sep 12, 2008, 05:16 PM
    Check the power lines to the starter
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

A Twin Shadow, Twin Ghost, Twin Guardian? [ 3 Answers ]

I have two friends (a male and a female) that they say that they have a twin - a black being, like a shadow that guards them.. They have different cases.. My female friend said that when someone sleeps in their house, especially for the first time, they notice someone who's like roaming around in...

Craftsman LT 1000 20HP Twin stopped moving while mowing [ 8 Answers ]

I was mowing a yard for a customer using her mower and it just stopped moving. I tested the clutch/brake pedal a few times and dis-engaged and re-engaged the drive mechanism and nothing happened. Don't know doo-doo about lawn mowers. Know a little about cars. Have replaced and/or adjusted a...

Track lighting suddenly stopped working [ 2 Answers ]

I had to move a previously installed and working track about 18inches from it's original position. I tested it in it's new position and it worked. I screwed it to the ceiling and it didn't work. Took it apart, put it back together. Nothing. There is power to the feed connector but none of the...

One Light Stopped Working on a Track of 3 [ 2 Answers ]

We have a track light that has been up for a year with no problems. One bulb burned out (we thought). We got a replacement bulb from the hardware store and changed it, but the bulb still won't work. We checked and the bulb is the correct type. It plugs in fine, fits snug, and everything seems...

View more questions Search