Ask Experts Questions for FREE Help !
Ask
    sacramento's Avatar
    sacramento Posts: 163, Reputation: 1
    Junior Member
    		  
    #1

    Sep 2, 2008, 05:09 PM
    Running a Barracuda pool vacuum
    I need some help. I cannot figure out how to hook up and run my Barracuda pool vac.
    I don't know where the hoses go or how to make it work. Any help will be greatly appreciated. Thank you all!:confused: :confused:
    hogger's Avatar
    hogger Posts: 3, Reputation: 3
    New Member
    		  
    #2

    Sep 12, 2008, 04:41 PM
    Are you new to the pool? If so all you have to do is put you're creepy in the pool with all the hoses attatched and or the one hose, then take the end of the hose opposite of the creepy and put it on one of you're jets to fill the line with water and then with a quick motion move the hose from the pool to the skimmer and put it in to the inlet to draw the suction.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Running new power to above ground pool [ 16 Answers ]

I need to get power to my above ground pool it is approx.100 feet from the elecrical panel what size wire do I need and when I bury it does it need to be in conduit?

Pool player wanting to start a pool hall in indianapolis [ 1 Answers ]

Simply; if anyone reading this is interested in starting a pool hall in indianapolis please reply. My name is lucas I have been around pool for over ten years and I currently work at a pool hall on the east side. My funds are low but, my will is high. I have several good ideas. Contact me...

Water coming from pool light conduit when pump is running [ 8 Answers ]

My brother bought a house with a pool and there were a few leaks in the plumbing. Whoever installed the pool used ABS instead of PVC which caused the majority of the leaks. These have been taken care of, but now for the tricky one... There is a piece of copper pipe that is apparently being...

After cement patch, can I paint inground pool walls and not use a pool liner [ 1 Answers ]

Existing pool liner has come off (bought home with pool as is) cement patches needed. I want to just paint the cement and fill the pool. Is that doable, or do I need the pool liner.

Running a 110v Sw off a 220v pool timer [ 5 Answers ]

Help, I have a Pool timer that is wired 220V for the pool pump. I have a separate 110v wire that was switched from my guest house to turn the pool lights on. There is a short in that wire now, possibly a wire breakage in the cement from shifting? Anyway, I've since unhooked it. My question...

View more questions Search