Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Resize RAID 10 partition on Windows Server 2003
[ 5 Answers ]
Hi everyone! Please help me! Never done it before so I want to know how to start. I have DELL PowerEdge 2850 Server with 4 SCSI disks RAID 10 Array and Windows Server 2003 SP1. I need to resize the boot partition (C:) NTFS because is too small (4 GBytes). Also, I have other 3 partitions (NTFS)...
Windows 2003 r2 server
[ 1 Answers ]
Dear All, I need a small help, I have windows 2003 r2 server installed and updated, whenever I plug in pen drive in the usb port the server gets hanged, there is no other solution rather than restart, since it a uprunning server and many users connected to it to access ERP installed in server it...
Can I create partition in Raid 5 with Windows 2003 Server OS?
[ 1 Answers ]
Elo... How can I create a partition in Raid 5 Controller with Windows 2003 Server OS without any losing data and configuration? Thanks in advance.
Downgrade windows 2003 server to windows 2000 server procedure
[ 1 Answers ]
Hi.. Recently I planned to buy a server with windows 2k server OS. Unfortunately I was told that win 2k server will be no longer in support at 2007.:confused: What happen is that the application I need to run is under win 2k server only, can anyone advise me how to perform the downgrade...
Setting up Windows Server 2003
[ 6 Answers ]
Okay I have a few questions. First is my Cable ISP gives me a Dynamic IP Address. But I would like to set up a home net work with Windows 2003 server. I would like to physically set it up this way. Modem to Router with DHCP turned off on the router, then router to server with DHCP, then... View more questions Search
|