Ask Experts Questions for FREE Help !
Ask
    STEELMAN43's Avatar
    STEELMAN43 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 7, 2008, 06:55 AM
    Crafstman lawn & garden tractor 917272066
    I have a crafstman lawn tractor when i turn the key switch nothing happens please help. I have checked safety switches and all seem to be working. Help bob thanks
    Crafstman 917272066 lawn 16hp
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    Sep 11, 2008, 04:47 PM
    Sorry I missed your post a few days ago. Lets start by following the power from the battery. You will need a voltage meter for low volt DC. Check at the battery, should read about 13 volts. Now check the wires that lead to the ignition switch, at least one is 13 volts, when you turn the key do you see more wires now carrying 13 volts. Back to you
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Craftsman Lawn Tractor - Unable to Start Tractor [ 4 Answers ]

Hello, I currently having difficulty starting my Sears Craftsman Lawn Tractor, (Model# 917.259830). I was using the tractor and had to shut it off to move a lawn hose. When I tried to start it again it just clicked. Specifically upon turning the keying, it makes a click sound followed by a whin....

Lawn and garden lawn mowers honda 3011 [ 2 Answers ]

I Have A Honda 3011 Riding Mower. The Battery Is Charged And When I Engage The Transmission, The Warning Beep Sounds Loudly. When I Turn The Key To Start, There Is No Sound And No Cranking. Any Suggestions To Cure Will Be Appreciated. Thanks.

Noisy Crafstman lawn tractor engine [ 1 Answers ]

My Craftsman garden tractor (917.275023) just started making a tin sound, almost like a faulty muffler.although the noise is coming from the engine. It's lost a little power but works fine otherwise. Valve issue?

Lawn and Garden - Push lawn mower [ 1 Answers ]

I put a new blad on my craftsman push mower but it is vibrating roughly. Do you have a diagram of how the blade should go on? Is it washer, blade, washer, bolt or blade, washer, washer, bolt, etc?

View more questions Search