Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
What's the configuration for a 2 switch/2 lamp circuit where one lamp's always ON
[ 8 Answers ]
Can someone tell me what is the switch and wiring configuration for a 2 switch/2 lamp circuit where one lamp is always ON? This configuration is rarely used, but it IS used, nevertheless, in small apartment buildings where there is a hallway and a long, dark stairway to the upper floor. There are...
15 amp switch on 20 amp circuit
[ 5 Answers ]
I am wiring a room with a 20 amp circuit. All of the receptacles are rated at 20 amps and I am running it all with 12 gauge wire. My question is when it comes to the switch for the ceiling fan/light, does the switch need to be rated 20 amp or can I use a 15 amp switch as the fixture probably...
Lamp, trips, circuit breaker
[ 3 Answers ]
My dog knocked over my lamp and tripped the circuit breaker, when I reset the circuit breaker it trips again. What could be the problem?
Convert a lamp to work on a "hot" switch via pull chain
[ 1 Answers ]
My builder wired a light in an arch way with a "hot" outlet. We put our pool table underneath the archway and now need to add a pool table lamp fixture. All the ones I can find require a light switch. Because the archway if solid wood there was no way to wire it to a switch so the builder told...
Circuit Breaker Won't Switch To On
[ 4 Answers ]
Hello, I'd appreciate anyone's advice. Today, I realized that one of my condensing units isn't working properly. So I was turning the breakers to both the A/C downstair and upstair units on and off periodically during the day to figure out the problem. Nothing has been solved on that end, but... View more questions Search
|