Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Replacing bedroom and closet doors.
[ 11 Answers ]
I have very plain hollow bedroom and closet doors which I'd like to replace one by one. I'm looking at the more modern doors that have a colonial design pattern on both sides but are also hollow. Do I have to replace the door jams/frame too, or can I just take off the old and install the new ones...
Sagging doors
[ 6 Answers ]
I am the maintenance person at a local school and have come across a problem with some side by side double steel doors that seem to sag so bad they don't want to close now, they rub together on top. All th hinges seem to be tight I even replaced one top one thinking maybe the pin could be wore out...
Doors
[ 2 Answers ]
What is the opening size I need to cut when installing a prehung door on a wall?
Replacing French Doors
[ 1 Answers ]
Hi, I have French Doors in my living room leading to the backyard that also includes a third stationary door that won't open. I'm attaching a rough picture of what it looks like. I would like to get rid of at least one of these and possibly even replace two so that there is just a single...
Prehung Doors
[ 2 Answers ]
I have several doors areas framed out in my basement with the ceiling being low because of vents. In several of these areas doors will be installed. I am looking to install split jamb prehung interior doors but there is approximately only 1 to 1 1/2 inch of header to the ceiling. In other words the... View more questions Search
|