Ask Experts Questions for FREE Help !
Ask
    dolantshirts's Avatar
    dolantshirts Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 31, 2008, 05:36 AM
    Convert 4 wire dryer cord to 3 wire
    How do I convert a 4 wire dryer cord to 3 wires?
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
    		  
    #2

    Aug 31, 2008, 06:19 AM
    See here:
    Self Help and More - Dryer Circuit Wiring and Hookup
    donf's Avatar
    donf Posts: 5,679, Reputation: 582
    Printers & Electronics Expert
    		  
    #3

    Aug 31, 2008, 07:09 AM
    Please read your instructions that came with the dryer.

    They may mandate a 4 wire connection which would mean that the frame has to be grounded to a receptacle post.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Convert Four Wire to Three wire for stove [ 12 Answers ]

Hi. I had a four wire circuit from a dryer that I needed to convert to a NEMA 10-50R for my new Whirlpool electric range. I wired the new receptacle with two hots a and GROUND and capped off the neutral. I tested from the hots to the ground and I get 120V. From hot to hot I get 240 Volts. The...

Need to Convert Wall Outlet to Fit GE Dryer Cord [ 2 Answers ]

Are there electrical cord converters that you can plug into the outlet. I just moved into a condo that was built in the 70s and my dryer is about 3 yrs old and has a L shaped prong at the top and wider bottom prongs. Is there a converter I can buy? The landlord doesn't want to upgrade to the...

Convert 3 wire to 4 wire for dryer [ 1 Answers ]

How do I place 4 wires on the 3 hook-up back of dryer? I was told told white on left, then black and green in middle and red on the right connect. The breaker keeps tripping as soon as I plug it in.

Can you use Metal Conduit as ground to convert 2 wire to 3 wire? [ 3 Answers ]

I need to convert an old cinder block house from 2 wire outlets to 3 wire by adding a ground to all outlets. Since the entire house is cinder block, all the circuits from the basement breaker box are in flexible metal conduit and metal outlet boxes... Is it possible to use the metal conduit...

View more questions Search