 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Yardman Lawn Tractor model 690 - 699
Please help. We have replaced the Solenoid, Ignition Switch, installed a new battery and still not able to crank. We have replaced the 20 amp fuse several times and it keeps blowing them. I have searched for any associated wiring diagrams for hours and have not been able to find one. The Model # is: 13AI699H088 Any help would be most appreciated.:confused:
|
||||
|
||||
|
Disconnect all wiring going to the starter. Make yourself a two wire strater cable with a inline fuse. Connect the battery to the starter to see if it spins or blows the fuse. This will not actually start the engine but it may get the starter to spin. Back to you for the results.
|
||||
Not your question?
Ask your question
View similar questions
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Sears Model 917.256524 Lawn tractor 15.5 HP
[ 9 Answers ]
I have a 15.5 Hp Craftsman lawn tractor. It starts fine but when you push the blade lever up to engage the blades the mower dies. Also if you let out on the brake/clutch pedel the mower stops. Note: the blade safety switch is OK and so is the clutch safety switch as is the seat safety switch. Any...
MTD Yardman lawn tractor
[ 2 Answers ]
My dad just gave me his nearly new MTD Yardman 38" 13.5 HP lawn tractor. The question I have: The steering doesn't work. I can turn the wheel, but the wheels won't move. I removed the rod that connects to the front right axle, then moved the steering wheel and the rod assembly moves perfectly. ...
Is there a clutch adjustment for a Lawn Chief 42 inch lawn tractor Model 13AG678G022
[ 1 Answers ]
Clutch adjustment
View more questions Search
|
