 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Fan control center to blower
I have a white rogers-steveco 90-113 fan control center and I would like to know how to wire it to my airco hot air furnace so I can use the blower for my outdoor wood boiler and also how to wire the thermostat to the fan control
|
||||
|
||||
|
Usually the instructions for this device come in the box. I have provided one below just in case you misplaced the original.
Follow standard wiring procedures. If uncomfortable working with electric I suggest contacting a local professional to have it wired in for you. WAY to many variables to post a solution here. This needs to be done ON SITE by a person who knows exactly what you have and what you want to do with it. http://www.white-rodgers.com/wrdhom/.../0037-5786.pdf |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I'm trying to make this old Magic Chef furnace work in my garage. I got it and the Fan Control Center was broken, laying inside unwired. I have no wiring diagram for this unit but the M# is G76-7502 C2-5. I need help wiring the fan control center and the fan limit switch to power. I bought a new...
I was replacing my transformer/fan control center for a Rheem Furnace (central Heat/air) and did not label the wires. I am now very confused... I have two sets of contact wires coming out of the relay, one set "no" and the other "nc". And the Primary wires on the transformer... How do I connect...
My heating unit blower will not come on in the (Fan Auto Mode). I hear the Heater come on but after a few seconds it shuts off. I assume there is some Type of limiter that shuts it off due to the blower not turning. The blower Will work in the (Fan On Mode) so this tells me the blower is...
I was curious if anyone knows of a "control center" type device for outside wireing... I've wired up quite a few indoors, but I know those indoor ones are NOT for outdoors because they are not water tight and most don't even have covers for the switches. Basically what I need is an outdoor box...
Hi, I have an oil forced air furnace, with the fan controlled by a Honeywell L4064 fan limit control. The fan itself is capable of two speeds. I would like to add a fan control centre so that I can control the fan from a switch, hopefully able to select speeds. I gather adding a White-Rogers...
View more questions Search
|
