Ask Experts Questions for FREE Help !
Ask
    jthampton's Avatar
    jthampton Posts: 2, Reputation: 1
    New Member
     
    #1

    Aug 24, 2008, 05:48 PM
    where can I connect a 12 volt power attachment
    I have an 07 x304 John Deere and want to connect a 12 volt attachment. Where can I connect for the 12 volt power?
    esquire1's Avatar
    esquire1 Posts: 2,483, Reputation: 209
    Ultra Member
     
    #2

    Aug 24, 2008, 06:04 PM
    Do you have a 12V power port located in the lower part of the pedistal?
    jthampton's Avatar
    jthampton Posts: 2, Reputation: 1
    New Member
     
    #3

    Aug 24, 2008, 09:06 PM
    No I don't jave the power port, however under the hood on the right hand side there looks like a 2 wire connector that may be what you pplug into.
    esquire1's Avatar
    esquire1 Posts: 2,483, Reputation: 209
    Ultra Member
     
    #4

    Aug 25, 2008, 03:54 AM
    That empty plug would plug into the power port if you had one. Go to your JD Dealer and get one Not expensive at all. It will mount in the lower part of the pedestal. Shoul have a blank plug there to remove and replace with the power port. Only other option would be to rig one up with clamps to connect onto the battery

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

110 volt versus 220 volt mini heat pump [ 6 Answers ]

I have enclosed my screened porch to create more living space(Florida Room). I am using a single zone mini split ductless heat pump for heating and cooling. It has been calculated that I need a 12,000 BTU unit. However, most of these units are available in 110 volts and 220 volts. The 220 models...

12 volt dc to ac power inverter? [ 1 Answers ]

I want to use a 120 volt ac airconditioner in my truck, it is 15 amps, if I get a 2300 power inverter will that be enough to run the air unit for 1 hr at a time . I'm a service tech and have no air in the truck so this may be my cheapest solutuin, I bought a 5600 BTU for 99 bucks now all I need is...

Can I connect a 240 volt electric range to a 30 amp breaker [ 1 Answers ]

I'm renovating a rental unit and removed a 3 in one appliance (bar fridge/2 stove elements/sink). It was hooked up to 10/3 copper wire on a 30 amp breaker. I want to install a 24 inch electric stove/oven in it's place. I want to hook up a 24 inch electric stove/range to 10 gauge 3 copper wire...

Replacing a 240 volt outlet with a 120 volt oulet [ 1 Answers ]

We've switched to a central air conditioning system and no longer need the 240 volt outlet by the dining room window. The house was built in 1928, updated in 1957, and again a couple of ad hoc times thereafter. The wiring is at times very old, brand new or somewhat old. My guess is that the 240...


View more questions Search