Ask Experts Questions for FREE Help !
Ask
    toocharp's Avatar
    toocharp Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Aug 24, 2008, 03:16 PM
    Wiring hot tub
    My hot tub is rated 40 amps what size gfci should be used? The same size or larger?
    albinfla's Avatar
    albinfla Posts: 310, Reputation: 35
    Full Member
    		  
    #2

    Aug 25, 2008, 06:40 AM
    You should go up one size on your breaker to a 50. It will break too easily if you size it at 40, due to in-rush amps when you first turn it on. Not many are installed with a gfci breaker, but in some states it is probably code. You may have a hard time finding one in consumer based stores.

    I am in the water treatment business and do work on commercial pools and spas also. We don't use GFCI on commercial stuff here in FL, except for outdoor electrical outlets and stuff. You may actually find an electrician if you re-post in electrical who can tell you exactly.

    Make sure you are using the correct size wiring to handle the load. Without looking it up, I think you probably need a #8awg wire depending on the distance you are running it. It is best to run the wire out to a service disconnect or single breaker panel at the tub, and then a short distance from the disconnect/breaker to the tub. That way if you go to work on it, you don't have to go to the house to operate the breaker.

    Al
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

100 amp v. 200 amp wiring [ 1 Answers ]

Hello, my family is buying an older home and part of the purchase is to update the existing 100 amp wiring. Is is worth upgrading to 200 amp. Service? The house is a victorian style that will be divided into two units of 1500 sq. ft. each. Thanks

Spa Wiring [ 1 Answers ]

Hello, I've read some of the posts on spa wiring and have a few questions about my project. I am wiring a 230V spa that is greater than 80 ft from the panel (approximately 130 ft). Because the spa normally requires 6 gauge, I assume 4 awg is appropriate for that distance so my plan is: 50 ft...

Janitrol wiring to rth3100c wiring [ 1 Answers ]

I've taken off the cover and the wires are all OK but the black one where does it go to? My heater won't come on (well some times the AC come on with out me turning it on.)

Honeywell wiring different from old thermostat wiring [ 2 Answers ]

I purchased a non-programmable digital thermostat to replace an analog thermostat with wiring red, white yellow and black. How do I match the wiring? HELP!!

John Deere - My dog ripped the wiring Out - Need Wiring Diagram or photos [ 2 Answers ]

I have a 3 year old L110 that ran fine until last week. I think my dog chased a chipmunk up under the hood and in trying to get to him ripped a bunch of wires out. I have spliced back together the obvious wires (color coded) but I have one black wire that I assume is a ground(?) and the two...

View more questions Search