Ask Experts Questions for FREE Help !
Ask
    redbud1's Avatar
    redbud1 Posts: 1, Reputation: 1
    New Member
     
    #1

    Aug 23, 2008, 10:26 AM
    Thermostat change
    Need suggestions for what would be proper stat for 2 heat 1 cool system. Currently using white rodgers thermostat, which lacks backlit feature and has no battery backup for power outages. Is a 24v wired system. 7 day programmable features. Thanks
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
     
    #2

    Aug 23, 2008, 11:09 AM
    You have a few to pick from. White Rodgers and Honeywell both have back lit and battery backup models. Cost will be a factor since the more you spend the more accessory toys you get.
    T-Top's Avatar
    T-Top Posts: 1,871, Reputation: 100
    Ultra Member
     
    #3

    Aug 23, 2008, 01:58 PM
    If you have a heat pump be sure to get the heat pump thermostat. They make 2 stage heat thermostats for just electric strip heat and gas furnace heat that will not work with a heat pump.
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
     
    #4

    Aug 23, 2008, 03:00 PM
    Look at the vision pro 8000 series by Honeywell. Good source of info Furnace Filters, Air Conditioner Filters, Air Quality - iaqsource. Presented nicely.
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
     
    #5

    Aug 23, 2008, 05:26 PM
    This pretty much explains it: Spectral Curves

    Each material (Silicon, CuInSe2, GaAs) has spectral response.

    The sun has a particular irradiance. Solar cells are tested at 25. Deg C with a lamp that emulates the AM 1.5 Global spectrum. AM = Air Mass. AM 0 would be above the atmosphere.

    You can actually calculate the short circuit current of a solar cell knowing the AM 1.5 Spectrum and the spectral response of the solar cell.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Change old thermostat to new one [ 1 Answers ]

I have a old White Rodgers thermostat model # 1f56w444. At the connections the wires are. W, Y, G, RH, jumper to RC, and B All the new ones that I have seen have. W, Y, G, RH, jumper to RC, but no B My question is what is the be wire for and what kind of new digital...

Thermostat Change [ 1 Answers ]

Recently I remodeled a house and gutted the interior. My son-in-law asked if I wanted to look at the old Honeywell T87 thermostat before he removed it. I told him to remove it, after all, how hard is it to rewire 4 wires. When it came time to install the new digital Honeywell thermostat,...

How to Change my Thermostat [ 2 Answers ]

OK. I currently have a White-rodgers 1F58 thermostat and I want to change it for a digital Programmable T-stat.. On the White-Rodgers the wiring is as follows. 6 wires are used w/ 1 jumper R- Red wire G- Green Wire O- Orange Wire W2- White Wire w/ a Jumper wire to - E C- Blue Wire Y-...

Can I change my thermostat? [ 4 Answers ]

Hi there, We just bought a house with radiant heat. This is our first experience with that type of heating system. It is wired to have 3 different areas in the house with their own thermostats. They're very basic thermostats, and I would like to change them out for digital programmable...


View more questions Search