Ask Experts Questions for FREE Help !
Ask
    AGJ's Avatar
    AGJ Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Aug 19, 2008, 04:08 AM
    Dryer not Drying completely
    I have a Frigidaire Crown Series FDEB23RGS1, I have replace the upper and lower felt, the heating element is still good, what else can be the problem?
    esquire1's Avatar
    esquire1 Posts: 2,483, Reputation: 209
    Ultra Member
    		  
    #2

    Aug 19, 2008, 05:50 AM
    Clogged vent. Check exhaust from dryer to where it exits the house
    fored's Avatar
    fored Posts: 26, Reputation: -2
    New Member
    		  
    #3

    Aug 19, 2008, 06:37 AM
    Hi. Could be a collapsed vent hose or vent pipe. Just another idea
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Gas dryer not drying [ 1 Answers ]

I have a maytag gas dryer and it stopped drying, so I opened the front and I see that the igniter glows and the flame comes on for a about thirty seconds and then after a while it glows again but no flame, I took off the back vent pipe, and I changed the igniter, what else can it be?

My GE Dryer isn't drying. [ 2 Answers ]

I have an older GE Dryer and it doesn't get very hot. It takes over an hour to dry a small load. I've cleaned the lint trap and that's about it.

Dryer not Drying all the way [ 4 Answers ]

I have a GE dryer that doesn't seem to dry all the way. I've cracked it open and cleaned out all the dust buildup from the vents (there was quite a bit) and the blower moter and blades. Should be clean as a whistle now. The heating element was clean and shows no cracks and looks to heat up OK...

View more questions Search