Ask Experts Questions for FREE Help !
Ask
    mullins racing's Avatar
    mullins racing Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 15, 2008, 11:22 PM
    Need to now proper freon pressure
    Need to now how much low and high pressure on a split unit that I have in my house. It is a intertherm unit I have model off air handler if that will do any good. I took air handler epart and washed it up reel good. Know I need to now when I get the proper amount or freon in the unit. The model for air handler is b1bm060k-c.. Thanks
    esquire1's Avatar
    esquire1 Posts: 2,483, Reputation: 209
    Ultra Member
    		  
    #2

    Aug 16, 2008, 03:37 AM
    Unless you are certified you will not be able to charge unit up yourself or even attach the gauges. If you are certified, you already know what the pressures should be
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #3

    Aug 16, 2008, 09:47 AM
    Excellent answer!!
    Missouri Bound's Avatar
    Missouri Bound Posts: 1,532, Reputation: 94
    Ultra Member
    		  
    #4

    Aug 17, 2008, 08:03 PM
    Mullins... your question has been answered accurately, but without an explanation. Because of the implied affect that CFC's have on the ozone layer, zealots have forced legislation regarding the handling of freon. Unfortunately in all the years that the laws have been in place, there is absolutely no research, finding, or proof that freon regulation has affected the ozone layer. It was typical of the liberal agenda, to pass "feel good" laws which in effect did absolutely nothing except to raise costs for everyone. So as a home owner, once again you have been assaulted in your wallet.
    bobo8409's Avatar
    bobo8409 Posts: 3, Reputation: 1
    New Member
    		  
    #5

    Aug 19, 2008, 06:23 AM
    Quote Originally Posted by mullins racing
    need to now how much low and high pressure on a split unit that i have in my house. it is a intertherm unit i have model off air handler if that will do any good. i took air handler epart and washed it up reel good. know i need to now when i get the proper amount or freon in the unit. the model for air handler is b1bm060k-c.. Thanks
    Needs to be charged by subcooling or superheat
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Compressor panels too dirty to measure freon pressure? [ 2 Answers ]

I'm having problems with my A/C unit. A service technician came to My house, looked at the compressor unit, and told me the panels Were full of debris that he couldn't accurately measure the freon Pressure. He asked to clean the panel for $89, which did not Include the service call, another ...

Do you add 30 410a freon pressure like you do r22 and r12 for high side pressure in c [ 1 Answers ]

Do you have to add 30 to the ambeint air temp. like you do for r22 and r12 to R410a freon to get the proper high side pressure reading

Freon Pressure [ 4 Answers ]

Would someone tell me what is the freon pressure reading on the guauges shoul be OK for 92 honda prelude? Thanks so large

Freon [ 2 Answers ]

How can determine if I have enough Freon in the system? Someone told me if coolant pipe is not very cold then there is not enough Freon. Is it true? TG

How much Freon [ 2 Answers ]

How much freon (R19) should be used to fill a home A/C unit. I need to replace the evaporator and must dischrage the system and refill it.

View more questions Search