 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Live Voltage Polarity Reversed
I just installed a new circuit board in my Carrier furance. When I do the Self Test I get a rapid flashing light which indicates a line voltage polarity reversed issue. How do I correct? Which color wire should be connected to the Com 24 connection? Thanks
|
||||
|
||||
|
Line voltage is the 120 volt imput for the circuit board. Just reverse the two wires.
Which color wire should be connected to the Com 24 connection? Thanks Which wire did you take off it? I hate to guess with your expensive board purchase. Did you make the wires before you removed them from the old board? If you can post a picture of the board and the wiring diagram that came in the box with the new board. |
||||
|
||||
|
My error code was "Incorrect Line Voltage Phasing" (nine flashes, Carrier Aire-Flo furnace). It was fixed by properly securing the green ground wire that was near the circuit board to a screw on the furnace.
Also on this brand new furnace the Black Line-In 120 volt wire and the Black with White Stripe Transformer wire were plugged into the circuit board in reversed order, fixed this problem as well. |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
What exactly is "reversed" in the reversed electrical polarity term?
Is reversed polarity when the hot and neutral are wired backwards
What does reversed polarity mean a. the hot and neutral are wired forwards b. the ground and neutral are wired backwards c. the hot and neutral are wired backwards
My house has bx cable wiring with grounded receptacle boxes per a test meter indication. I want to replace two slot outlets with three hole grounded receptacles but the polarity on those in place is reversed with the long slot hot and the short slot neutral. What's the best course? ...
Regarding reverse polarity, I have 5 outlets in a room all showing reversed. The top of the outlets are wired to the light switch(red wire) the bottoms are hot all the time(black wire). When I remove the red wire from the switch the polarity is fixed.. if I hook that wire back up they then reverse...
View more questions Search
|
