Ask Experts Questions for FREE Help !
Ask
    Steveo78's Avatar
    Steveo78 Posts: 1, Reputation: 1
    New Member
     
    #1

    Aug 11, 2008, 12:54 PM
    How many amps is # 6 wire ratered for
    How many amps is # 6 wire rated for
    donf's Avatar
    donf Posts: 5,679, Reputation: 582
    Printers & Electronics Expert
     
    #2

    Aug 11, 2008, 01:03 PM
    50 amps would be the general answer. However for an accurate answer we need the exact type of wire you are using
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
     
    #3

    Aug 11, 2008, 02:45 PM
    Try this site, as mentioned above, the insulation is an important factor, if THHN @70 Degrees it is rated at 65 Amps, Look through this, about half way down the page:
    Mike Holt)

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Cost to upgrade from 100 amps to 200 amps and ground [ 4 Answers ]

StanFortyMan has made a lot of sense about my needs in a home with a 100 AMP Service.. I would like to upgrade to 200 amps.. with some ground sockets(or whatever this is called) and put in more sockets... The house is 1300 square feet... does anyone have a guestimate of costs?? Thanks, Annie

100 household amps vs 200 amps [ 6 Answers ]

I am living in an "old" house with 100 amps coming in. I am in the process of doing reconstruction and would like to know if I run all new wires and outlets and get rid of dusty broken wires and connection boxes left open to rot---Can I use the same fuses and wiring for 100 as for 200 or do I...

Changing from 100 amps to 200 amps [ 1 Answers ]

I have a gas water heater (40 gallon tank). I want to change it to an electric tankless water heater. I have read that I need 200 amps in the house to do this, but currently I have only 100 amps. The outside meter is located only about 25 feet away, but the lines are underground. What is...

Hard wire 3 wire to 4 wire 220 service [ 2 Answers ]

How do I hard wire my 3 wire (red,blk & bare copper wires) 220vac cooktop to the 4 wire (black/white stripe,black/red stripe, blk/blk & bare alum wires) in the house supply j-box ?


View more questions Search