 |
|
|
 |
New Member
|
|
Jul 27, 2008, 02:02 PM
|
|
Network of 2 PC
Hi,
I have a network of 2 PC at home (one connected via cable to the router and a laptop is connected via wireless to the router) connected to a Linksys WRT54G Router.
The problem is to transfer files between computers;
When I try to transfer a file the system tells me that the network path is not accessible available but if I connect the laptop via wire instead of a wireless connection everything works perfectly without doing any settings.
Please note the follwoing;
The internet works good
I have no firewall active
Can anyone help please?
|
|
 |
Ultra Member
|
|
Jul 27, 2008, 10:23 PM
|
|
Do not have wireless myself but is there firewall settings that you can check about the wirless
To help others help also, what OS's are on your network
|
|
 |
Uber Member
|
|
Jul 27, 2008, 10:39 PM
|
|
The NETBIOS over TCP/IP protocol probably isn't enabled for the wireless network.
|
|
 |
Senior Member
|
|
Jul 28, 2008, 07:13 AM
|
|
In addition to the post by KISS, also turn off wireless security and then try networking via wireless.
If this is the problem, change your wireless security to a different type. Use WPA instead of WEP.
|
|
 |
New Member
|
|
Aug 8, 2008, 12:21 PM
|
|
I have XP on desktop and Vists Home premium on laptop
 Originally Posted by seahwk83
do not have wireless myself but is there firewall settings that you can check about the wirless
to help others help also, what OS's are on your network
|
|
 |
Senior Member
|
|
Aug 8, 2008, 03:31 PM
|
|
|
|
 |
New Member
|
|
Aug 14, 2008, 06:51 AM
|
|
 Originally Posted by chuckhole
Thanks a lot... it worked
|
|
 |
New Member
|
|
Nov 6, 2008, 01:29 PM
|
|
Got the same problem again
Please help!!
Urgent need of it..
 Originally Posted by lovescorpio2002
Hi,
I have a network of 2 pc at home (one connected via cable to the router and a laptop is connected via wireless to the router) connected to a Linksys WRT54G Router.
The problem is to transfer files between computers;
When i try to transfer a file the system tells me that the network path is not accessable availble but if i connect the laptop via wire instead of a wireless connection everything works perfectly without doing any settings.
Please note the follwoing;
The internet works good
i have no firewall active
can anyone help please?
|
|
 |
Ultra Member
|
|
Nov 6, 2008, 03:44 PM
|
|
Since it worked
Any changes that either happened or that you perhaps made to your computer around the time that the problem started; particularly any software or hardware that you installed or setup
|
|
Question Tools |
Search this Question |
|
|
Add your answer here.
Check out some similar questions!
Local area network&wide area network
[ 1 Answers ]
i. If we can extend the LAN then why we need a WAN?
ii. How can a bridge know whether to forward frames?
iii. Can the length of an Ethernet be increased to many segments of 500 meter each merely by adding a repeater to connect each additional segment?
iv. How can a computer attach to a network...
Network 2 pcs
[ 1 Answers ]
I want to connect two computers in my room to facilitate communication among them.
Please help me out with a step by step procedure
Thanks...
Network
[ 1 Answers ]
I have a network in my home I have one of the PC with 2 network card to share the internet on the others but recently the internet stopped to be shared several people tried to fix it without any luck
Could you please tell me thje exact procedure to do this network again
Thank you
I can't network my 2 PC...
[ 33 Answers ]
I'm here again :), I want to ask how can I network my two PC I'm not using router, I'm just use a cable I already connected the two PC but seems they don't seen/locate each other does it something about what I'm using? Cause I'm using Win XP and the other is Win 2000... :confused:
Please...
View more questions
Search
|