Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Celing fan pull switch
[ 8 Answers ]
I have a stacked switch that will hold 8 wires there were 2 black 1 grey 1green and 1 purple. Some one replaced it and got it wired wrong the fan stayed on low and the switch would not effect it. I took and old single layer switch from another fan touched the black to each wire to find the speeds...
Hampton Bay pull chain
[ 3 Answers ]
I disconnected all 4 wires from the pull chain before writing down their configuration. I have 2- black wires, a red wire and a blue wire. My new pull switch is labeled L - 1 - 2- 3. Does anyone know the wiring configuration?:confused:
Three way chain pull switches
[ 6 Answers ]
I have (I believe) an old ceiling fan that has a three speed pull chain switch. The chain broke off inside the switch. The switch has four leads, purple, blue, pink (or flesh) and white. My problem is I can't find a switch that matches this configuration. I purchased a three way pull switch that...
Replacing a pull chain switch
[ 1 Answers ]
Help! My new pull chain switch has (only) two black wires; how do I connect it to the ceiling wires (one black, one white, plus the ground wire)? Thank you! Willow
Pull Chain Replacement
[ 1 Answers ]
I turned off my power and went to the hardware store to purchase a replacement pull chain light switch for my ceiling fan/light only to find upon my return that the little woman thought she would help me by removeing the old switch and bulb socket plate without labeling old wires. So here is my... View more questions Search
|