|
|
|
|
New Member
|
|
Aug 2, 2008, 02:42 PM
|
|
Is tile bullnose baseboard installed before or after floor tile?
My porcelain tile comes with a bullnose that I want to use as the baseboard. I found a response to another question, stating that the floor should be installed first, but I want a grout line between the floor tile and the baseboard, it would be very hard to make it uniform if the floor is installed first. Any thoughts; what is the standard practice?
|
|
|
Home Improvement & Construction Expert
|
|
Aug 2, 2008, 03:15 PM
|
|
Do you mean bull nose or cove base? Cove base can be installed on top of the floor tile or set flush. Usually installed on top to cover cut edge of the floor tile. Looks real nice installed flush but you have to make precise cuts of the last piece of floor tile, usually with a saw.
|
|
|
New Member
|
|
Aug 2, 2008, 05:31 PM
|
|
Originally Posted by hkstroud
Do you mean bull nose or cove base? Cove base can be installed on top of the floor tile or set flush. Usually installed on top to cover cut edge of the floor tile. Looks real nice installed flush but you have to make precise cuts of the last piece of floor tile, usually with a saw.
It is bullnose, without the curve of a cove trim.
|
|
|
Home Repair & Remodeling Expert
|
|
Aug 2, 2008, 08:17 PM
|
|
I am not sure yet we are talking about the right thing. A bullnose has a 90 degree curve along its top edge, a cove base is pretty similar but usually different size. Whatever it is the floor tile goes first. You are welcome to try it base first but you will need totally perfect cutting skills to make the job look perfect. Cove hides the imperfections of your cuts. It's a bit like quarter round used be sloppy carpet guys who rely on the quarter round covering the errors.
|
|
|
Home Improvement & Construction Expert
|
|
Aug 2, 2008, 08:24 PM
|
|
If it is just bull nose, rounded top edge, square bottom edge, you definitely want the floor down first.
|
|
|
New Member
|
|
Aug 3, 2008, 06:53 AM
|
|
Thank you both for your responses. Yes, it is just the rectangular bullnose with the sloped top.
|
|
|
Home Repair & Remodeling Expert
|
|
Aug 3, 2008, 11:08 AM
|
|
Let us know how your project progresses. Tiling is one of my better skills.
|
|
|
New Member
|
|
Aug 24, 2009, 01:38 AM
|
|
|
|
|
Ultra Member
|
|
Aug 24, 2009, 05:46 PM
|
|
In order to maintain an even grout line between floor and baseboard, use palstic spacers. These can be removed after tile sets.
The spacers come in various sizes. If possible use caulking the same color as grout. If grout is used in the corner, it may crack because of movement.
Good luck
Chuck
|
|
Question Tools |
Search this Question |
|
|
Add your answer here.
Check out some similar questions!
Can I use cut floor tile for a tile baseboard?
[ 4 Answers ]
Hi,
I laid down 13"by13" tile for my bathroom floor, and it looks pretty good. I have enough tile left over to make a tile baseboard. The width could be anywhere from 3 inches to 6.5 inches. What would be best? Would the finish edge at the top look strange? How could I make it look best? ...
Tile leak from 3rd floor through 2nd floor ceiling (bath)
[ 5 Answers ]
Hi All: We renovated our third floor bathroom which included stripping the floor down and installing tiles (1" squares within 1' blocks). After our 3rd floor tenant takes long showers we get some leakage through her floor and thusly through our ceiling (which we now have partially open to have...
Converting a tile floor to a stained concrete floor
[ 2 Answers ]
I am thinking about taking up the tile in my kitchen and staining the concrete underneath it, but I don't know if it will be possible to get up all the stains left on the concrete from the tile. I do not want to take up the tile if there is too much of a possibility that the tile stains won't come...
Ceramic Tile Baseboard
[ 1 Answers ]
Hello - I am putting in a ceramic tile floor in a bathroom and plan on cutting the tiles and using them for a baseboard. Is there a correct size that this baseboard should be? And should I put anything on the top edge of the tile to finish it off? Any information would be appreciated. Thanks!
View more questions
Search
|