Ask Experts Questions for FREE Help !
Ask
    jfletc5802's Avatar
    jfletc5802 Posts: 1, Reputation: 1
    New Member
     
    #1

    Aug 1, 2008, 07:40 PM
    Separate circuit for a microwave
    When rewiring a house, does a microwave have to to be on it's own circuit?
    DrLang's Avatar
    DrLang Posts: 98, Reputation: 10
    Junior Member
     
    #2

    Aug 1, 2008, 07:45 PM
    No. A microwave oven does not draw so much current that it needs its own circuit. However, it's not a bad idea to use one of those outlets with built in breakers where you plan to plug in your microwave to prevent needing to go to the circuit box if you happen to overload the circuit.
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
     
    #3

    Aug 1, 2008, 08:01 PM
    Quote Originally Posted by jfletc5802
    When rewiring a house, does a microwave have to to be on it's own circuit?
    If it is built in or fixed in place such as an over-the-range unit YES, it does need it's own circuit.
    Counter top units do not, but it is a good idea.
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
     
    #4

    Aug 1, 2008, 08:03 PM
    Quote Originally Posted by DrLang
    However, it's not a bad idea to use one of those outlets with built in breakers where you plan to plug in your microwave to prevent needing to go to the circuit box if you happen to overload the circuit.
    Got a link to such a thing? In over 25 years I have never seen anything like that.
    DrLang's Avatar
    DrLang Posts: 98, Reputation: 10
    Junior Member
     
    #5

    Aug 1, 2008, 08:22 PM
    Quote Originally Posted by stanfortyman
    Got a link to such a thing? In over 25 years I have never seen anything like that.
    Looking further into it, I was specifically referring to a GFCI outlet. This is not what I thought it was. This is what I get for knowing only enough to be dangerous.
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
     
    #6

    Aug 1, 2008, 08:30 PM
    Yeah, I was wondering about that.

    A GFI is NOT a "breaker" or overcurrent device. This is a common misconception by DIYers and lay folks.
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
     
    #7

    Aug 2, 2008, 05:57 AM
    You must refer to the manufacturer's instructions for any appliance or device and provide what is required.
    magicalpig's Avatar
    magicalpig Posts: 4, Reputation: 1
    New Member
     
    #8

    Aug 5, 2008, 12:33 PM
    Quote Originally Posted by stanfortyman
    If it is built in or fixed in place such as an over-the-range unit YES, it does need it's own circuit.
    Counter top units do not, but it is a good idea.
    stanfortyman,
    This relates to the other issue you've been helping me with where I wanted to hardwire my microwave.
    If the microwave is considered fixed-in-place and needs its own circuit, does this mean its receptacle cannot be a duplex receptacle because of the potential of plugging something else in?

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

OTR Convection Microwave circuit [ 1 Answers ]

I just installed an OTR convection microwave by running a 12 gauge wire down to a GFCI 20A circuit. I thought that the circuit was just rarely used outlets but I found out that it is the same circuit as the refrigerator. Is it better to run a brand new dedicated circuit to the circuit breaker box...

Lighting/electrical - is separate circuit possible? [ 3 Answers ]

I have lights in my house that have both a regular switch and a dimmer switch. A few days ago I used the regular switch to turn on the lights and it looked like a circuit breaker tripped and the lights went out. I checked the main box and no circuits were tripped... and I looked for a sub-panel...

GFCI trips when a separate circuit is activated [ 4 Answers ]

I'd appreciate help on an odd problem. I'm pretty good with electricity but stumped on this. I installed a GFCI in the middle of a 120V outlet circuit. It works correctly, protecting itself and all the downstream load outlets. But, on a completely separate circuit (separate breaker), I also...

Microwave trips circuit [ 3 Answers ]

I have a 5-year old over-the-range Maytag microwave connected to 20-Amp service on it's own circuit. A few months ago, it began tripping the circuit when I would open or close the door. It never trips the circuit when it's cooking; just when I open or close the door. Also, it doesn't happen...

3A Toe Heater on Microwave Circuit? [ 3 Answers ]

Hello Group! Does anyone know if it is permissible to put a toe heater in the kitchen on the same 20A circuit as the microwave? The circuit only has the microwave on it. Any help greatly appreciated!:confused:


View more questions Search