Ask Experts Questions for FREE Help !
Ask
    proxeneo's Avatar
    proxeneo Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 31, 2008, 08:41 AM
    Start up
    Hello, My computer won't start up anymore. I press the run button and one of the lights up and the fan starts but nothing else turns on and the monitor doesn't register that the tower is turned on nothing smells like it's been fried or anything does anyone know any possible reason for this?
    JBeaucaire's Avatar
    JBeaucaire Posts: 5,426, Reputation: 997
    Software Expert
    		  
    #2

    Jul 31, 2008, 12:04 PM
    This usually means a bad power supply in my experience. The computer will turn on and the POST will attempt if it were something else.
    Vandos's Avatar
    Vandos Posts: 5, Reputation: 1
    New Member
    		  
    #3

    Jul 31, 2008, 12:07 PM
    Make sure the monitor is plugged in, if your hearing beeps look up your computers beep codes they can usually help you.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Where do I start looking for grants to start up construction business in Mn. [ 3 Answers ]

Hello,I am John and I would appreciate any help I could get on finding some grants or low interest loans for starting a concrete contracting business.I have searched some sites but most want money for a kit.My credit is not very good and I am just trying to start a small construction business.I am...

Lawn mower won't start , changed Plug , but Still won't Start [ 2 Answers ]

My lawn mower won't Start , I tried Changing the Plug , But still won't Start

Can't start my Poulan chainsaw. Start rope too hard to pull. [ 1 Answers ]

Can't start my chainsaw because the start rope is too hard to pull out. Pulling the rope causes a jerky action.

Tractor won't start with key - but I can jump starter to start [ 2 Answers ]

I bought a used Ford 1210 compact tractor and it will not start with the key. I replaced the switch and still no luck. Tested the safety switch & wire that goes to the starter and both are in good order (verified with ohm meter). When I try to start with the key, the lights dim some so I can see...

View more questions Search