Ask Experts Questions for FREE Help !
Ask
    3stixs's Avatar
    3stixs Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jul 30, 2008, 09:36 AM
    88crx si won't start
    My 88 CRX Si no spark from coil to plugs, Installed new coil what around the block and made it half way before dying again and again it will not start?
    Thanks
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #2

    Jul 30, 2008, 10:23 AM
    Replace the Ignition Control Module (ICM), being sure to coat the back with heat-transfer silicone grease.

    While we find your parts, please enter your ZIP Code at PartsAmerica.com
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Where do I start looking for grants to start up construction business in Mn. [ 3 Answers ]

Hello,I am John and I would appreciate any help I could get on finding some grants or low interest loans for starting a concrete contracting business.I have searched some sites but most want money for a kit.My credit is not very good and I am just trying to start a small construction business.I am...

Lawn mower won't start , changed Plug , but Still won't Start [ 2 Answers ]

My lawn mower won't Start , I tried Changing the Plug , But still won't Start

Can't start my Poulan chainsaw. Start rope too hard to pull. [ 1 Answers ]

Can't start my chainsaw because the start rope is too hard to pull out. Pulling the rope causes a jerky action.

91 honda crx no start or rough start, puzzled HELP! [ 5 Answers ]

Ok, I'm running a SOHC ZC motor. I have good compressions across all pistons at 135psi and holding a piece. I have checked the timing and it is correct. I have checked the fuel pressure and it is OK. I haven't been able to figure out how to lean the fuel out though, but anyway, it starts up and...

View more questions Search